Select parts.
| car name | 671130 HILUX (1978/08 - 1988/09) | |
|---|---|---|
| model name | LN30-MDSY (1979/12 - 1983/10) | |
| ENGINE 1 | L | 2200CC DIESEL |
| GRADE | DLX | DLX TYPE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| DECK,CAB | T1 | LOW DECK,PICKUP(STANDARD DECK 1-SIDE OPEN) |
| BUILDING CONDITION | CBU | COMPLETELY BUILT UNIT |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33311 | 33301-35030 | SHAFT, INPUT | 1979/12 - 1984/01 | LN3#,4# N=27 |
DISCONTINUED | DISCONTINUED | ||
| 33311A |
90363-32010 |
BEARING (FOR INPUT SHAFT FRONT) | 1979/12 - 1982/01 | LN30,40 | JPY 10,123 | USD 69.82 | ||
| 33311A |
90365-32011 |
BEARING (FOR INPUT SHAFT FRONT) | 1982/01 - 1982/11 | LN3#,4# | JPY 10,123 | USD 69.82 | ||
| 33311A |
90363-32019 |
BEARING (FOR INPUT SHAFT FRONT) | 1982/11 - 1984/01 | LN3#,4# | JPY 2,868 | USD 19.78 | ||
| 33311B |
90520-30214 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.05,マーク 0,T=2.05-2.10 |
JPY 225 | USD 1.55 | ||
| 33311B |
90520-30215 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.10,マーク 1,T=2.10-2.15 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30216 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.15,マーク 2,T=2.15-2.20 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30217 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.20,マーク 3,T=2.20-2.25 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30218 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.25,マーク 4,T=2.25-2.30 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30219 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.30,マーク 5,T=2.30-2.35 |
JPY 253 | USD 1.75 | ||
| 33311C |
90521-33001 |
RING, HOLE SNAP (FOR NEEDLE ROLLER) | 1979/12 - 1984/01 | LN3#,4# | JPY 436 | USD 3.01 | ||
| 33311D |
90361-06047 |
BEARING, INPUT SHAFT | 1978/08 - 1983/12 | LN3#,4#,RN3#,4# | JPY 225 | USD 1.55 | ||
| 33311G |
90520-71221 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1979/12 - 1982/01 | LN3#,4# | JPY 295 | USD 2.04 | ||
| 33311G |
90520-76002 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/08 | LN3#,4# | JPY 478 | USD 3.30 | ||
| 33318 |
33318-35010 |
PIECE, GEAR SPLINE, NO.5 | 1979/12 - 1980/08 | LN30,40 | JPY 10,545 | USD 72.72 | ||
| 33318 |
33318-30010 |
PIECE, GEAR SPLINE, NO.5 | 1980/08 - 1982/12 | LN3#,4# | JPY 12,232 | USD 84.36 | ||
| 33318 |
33318-28010 |
PIECE, GEAR SPLINE, NO.5 | 1982/12 - 1985/08 | LN3#,4# | JPY 13,357 | USD 92.12 | ||
| 33321 |
33321-35090 |
SHAFT, OUTPUT | 1979/12 - 1981/01 | LN30,40 | CONTACT US | CONTACT US | ||
| 33321 |
33321-35091 |
SHAFT, OUTPUT | 1981/01 - 1983/12 | LN30,40 | JPY 41,336 | USD 285.08 | ||
| 33321B |
90520-25270 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 厚さ=2.43-2.48,マーク 10,T=2.43-2.48 |
JPY 183 | USD 1.26 | ||
| 33321B |
90520-25271 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 厚さ=2.49-2.54,マーク 11,T=2.49-2.54 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25277 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=1.89-1.94 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25278 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=1.95-2.00 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25279 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=2.01-2.06 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25280 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=2.07-2.12 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25281 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=2.13-2.18 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25282 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=2.19-2.24 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25283 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 T=2.25-2.30 |
JPY 197 | USD 1.36 | ||
| 33321B |
90520-25284 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 厚さ=2.31-2.36,マーク 8,T=2.31-2.36 |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-25285 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1981/01 | LN30,40 厚さ=2.37-2.42,マーク 9,T=2.37-2.42 |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-25005 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.67-2.72,マーク A,T=2.67-2.72 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.73-2.78,マーク B,T=2.73-2.78 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25009 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.79-2.84,マーク C,T=2.79-2.84 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25010 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.85-2.90,マーク D,T=2.85-2.90 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25011 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.91-2.96,マーク E,T=2.91-2.96 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25012 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=2.97-3.02,マーク F,T=2.97-3.02 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25013 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=3.03-3.08,マーク G,T=3.03-3.08 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25014 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=3.09-3.14,マーク H,T=3.09-3.14 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25015 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=3.15-3.20,マーク J,T=3.15-3.20 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25016 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=3.21-3.26,マーク K,T=3.21-3.26 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25017 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1981/01 - 1985/08 | LN3#,4# 厚さ=3.27-3.32,マーク L,T=3.27-3.32 |
JPY 155 | USD 1.07 | ||
| 33321C |
90520-68002 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1979/12 - 1980/08 | LN30,40 | JPY 394 | USD 2.72 | ||
| 33321C |
90520-71221 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1980/08 - 1985/08 | LN3#,4# 厚さ=1.65,内径=71.1 |
JPY 295 | USD 2.04 | ||
| 33321D |
90520-28010 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=1.85,マーク D-1,T=1.85-1.90 |
JPY 253 | USD 1.75 | ||
| 33321D |
90520-28011 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=1.95,マーク E-1,T=1.95-2.00 |
JPY 253 | USD 1.75 | ||
| 33321D |
90520-28012 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=1.75,マーク C-1,T=1.75-1.80 |
JPY 169 | USD 1.16 | ||
| 33321D |
90520-28013 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.05,マーク F-1,T=2.05-2.10 |
JPY 155 | USD 1.07 | ||
| 33321D |
90520-28246 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=1.90-1.95,マーク E,T=1.90-1.95 |
JPY 239 | USD 1.65 | ||
| 33321D |
90520-28248 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.00-2.05,マーク F,T=2.00-2.05 |
JPY 183 | USD 1.26 | ||
| 33321D |
90520-28245 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1978/08 - 1988/09 | LN3#,4#,RN3#,4# 厚さ=1.80-1.85,マーク D,T=1.8 |
JPY 239 | USD 1.65 | ||
| 33321V |
90363-30021 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1979/12 - 1980/08 | LN30,40 OD=72 |
CONTACT US | CONTACT US | ||
| 33321V |
90363-30026 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1980/08 - 1982/09 | LN3#,4# OD=75 |
JPY 2,868 | USD 19.78 | ||
| 33321V |
90363-30036 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1982/09 - 1984/01 | LN3#,4# | JPY 2,868 | USD 19.78 | ||
| 33331 | 33331-35040 | GEAR, REVERSE | 1979/12 - 1984/01 | LN3#,4# N=34 |
DISCONTINUED | DISCONTINUED | ||
| 33332 |
33033-35010 |
GEAR, 2ND | 1979/12 - 1988/05 | LN3#,4# N=28 |
JPY 21,231 | USD 146.42 | ||
| 33332B |
90364-38002 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1979/12 - 1985/08 | LN3#,4# | JPY 2,714 | USD 18.71 | ||
| 33333 |
33034-35010 |
GEAR, 3RD | 1979/12 - 1980/08 | LN30,40 N=27 |
JPY 22,074 | USD 152.24 | ||
| 33333 |
33034-35011 |
GEAR, 3RD | 1980/08 - 1983/12 | LN3#,4# N=27 |
JPY 13,638 | USD 94.06 | ||
| 33333A |
90364-35003 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1979/12 - 1980/08 | LN30,40 | JPY 2,981 | USD 20.56 | ||
| 33333A |
90364-35005 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1980/08 - 1985/08 | LN3#,4# | JPY 2,981 | USD 20.56 | ||
| 33335 |
33032-35010 |
GEAR, 1ST | 1979/12 - 1984/01 | LN3#,4# N=33 |
JPY 23,621 | USD 162.90 | ||
| 33335C |
90364-39002 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1979/12 - 1985/08 | LN3#,4# | JPY 3,782 | USD 26.08 | ||
| 33336 | 33336-35010 | GEAR, 5TH | 1979/12 - 1980/06 | LN30,40 N=23 |
DISCONTINUED | DISCONTINUED | ||
| 33336 |
33336-35011 |
GEAR, 5TH | 1980/06 - 1980/10 | LN30,40 N=23 |
CONTACT US | CONTACT US | ||
| 33336 |
33336-35050 |
GEAR, 5TH | 1980/10 - 1983/12 | LN30,40 N=23 |
JPY 5,863 | USD 40.44 | ||
| 33349 |
33349-30020 |
WASHER, 5TH GEAR THRUST | 1980/08 - 1985/08 | LN3#,4# | JPY 1,476 | USD 10.18 | ||
| 33355 |
33355-35010 |
RACE, 1ST GEAR BEARING INNER | 1979/12 - 1980/08 | LN30,40 N=23 |
JPY 3,768 | USD 25.99 | ||
| 33355 |
33355-35011 |
RACE, 1ST GEAR BEARING INNER | 1980/08 - 1985/08 | LN3#,4# N=23 |
JPY 4,359 | USD 30.06 | ||
| 33355A |
90360-06004 |
KEY OR BALL, 1ST GEAR BEARING INNER RACE LOCK | 1979/12 - 1985/08 | LN3#,4# | JPY 112 | USD 0.78 | ||
| 33359 |
33359-35010 |
RACE, 5TH GEAR BEARING INNER | 1979/12 - 1980/08 | LN30,40 | CONTACT US | CONTACT US | ||
| 33359A |
90360-06004 |
BALL, 5TH GEAR BEARING INNER RACE LOCK | 1979/12 - 1985/08 | LN3#,4# | JPY 112 | USD 0.78 | ||
| 33361 |
33361-35020 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1979/12 - 1985/08 | LN3#,4# | JPY 8,577 | USD 59.15 | ||
| 33362 |
33362-35020 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1979/12 - 1985/08 | LN3#,4# | JPY 12,795 | USD 88.24 | ||
| 33364 |
33364-35010 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1979/12 - 1985/08 | LN3#,4# | JPY 10,545 | USD 72.72 | ||
| 33365 |
33365-35020 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1979/12 - 1985/08 | LN3#,4# | JPY 422 | USD 2.91 | ||
| 33366 |
33366-35020 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1979/12 - 1985/08 | LN3#,4# | JPY 436 | USD 3.01 | ||
| 33367 |
33368-20012 |
RING, SYNCHRONIZER, NO.1 | 1979/12 - 1985/08 | LN3#,4# | JPY 3,459 | USD 23.85 | ||
| 33368 |
33367-14010 |
RING, SYNCHRONIZER, NO.2 | 1979/12 - 1985/08 | LN3#,4# | JPY 2,924 | USD 20.17 | ||
| 33369 |
33367-14010 |
RING, SYNCHRONIZER, NO.3 | 1979/12 - 1985/08 | LN3#,4# | JPY 2,924 | USD 20.17 | ||
| 33371 |
33371-14031 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1979/12 - 1985/08 | LN3#,4# | JPY 183 | USD 1.26 | ||
| 33376 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY (FOR NO.3 CLUTCH HUB) | 1979/12 - 1985/08 | LN3#,4# |
JPY 197 | USD 1.36 | ||
| 33377 |
33394-35010 |
KEY, SYNCHROMESH SHIFTING (FOR NO.3 CLUTCH HUB) | 1979/12 - 1980/08 | LN30,40 |
JPY 380 | USD 2.62 | ||
| 33377 |
33394-30010 |
KEY, SYNCHROMESH SHIFTING (FOR NO.3 CLUTCH HUB) | 1980/08 - 1985/08 | LN3#,4# |
JPY 422 | USD 2.91 | ||
| 33391 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1979/12 - 1985/08 | LN3#,4# | JPY 197 | USD 1.36 | ||
| 33395 | 33395-14010 | SLEEVE, TRANSMISSION HUB, NO.3 | 1979/12 - 1981/06 | LN30,40 | DISCONTINUED | DISCONTINUED | ||
| 33395 |
33395-14013 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1981/06 - 1984/01 | LN3#,4# | JPY 8,717 | USD 60.12 | ||
| 33402 |
33402-35030 |
GEAR SUB-ASSY, REVERSE IDLER | 1979/12 - 1984/01 | LN3#,4# N=28 |
JPY 16,028 | USD 110.54 | ||
| 33411A |
90365-25007 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 1979/12 - 1984/01 | LN3#,4# | JPY 5,919 | USD 40.82 | ||
| 33411D |
90520-49222 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 1979/12 - 1985/08 | LN3#,4# 厚さ=1.07,外径=55.6 |
JPY 267 | USD 1.84 | ||
| 33411E | 90179-20002 | NUT(FOR COUNTER GEAR SHAFT) | 1979/12 - 1985/08 | LN3#,4# | DISCONTINUED | DISCONTINUED | ||
| 33411H |
90365-18002 |
BEARING OR ROLLER(FOR COUNTER GEAR REAR) | 1979/12 - 1983/08 | LN3#,4# | JPY 3,782 | USD 26.08 | ||
| 33411P |
90365-31002 |
BEARING, COUNTER SHAFT CENTER | 1979/12 - 1985/08 | LN3#,4# | JPY 4,668 | USD 32.19 | ||
| 33411Q |
90520-23089 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.10-2.15,T=2.10-2.15 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23090 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.20-2.25,T=2.20-2.25 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23115 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.05-2.10,T=2.05-2.10 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23143 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.15-2.20,T=2.15-2.20 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23144 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.25-2.30,T=2.25-2.30 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23145 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1979/12 - 1985/08 | LN3#,4# 厚さ=2.30-2.35,T=2.30-2.35 |
JPY 183 | USD 1.26 | ||
| 33411R |
90521-38001 |
RING, SNAP, COUNTER GEAR REAR BEARING | 1979/12 - 1983/08 | LN3#,4# | JPY 197 | USD 1.36 | ||
| 33421 |
33421-35070 |
GEAR, COUNTER | 1979/12 - 1980/08 | LN30,40 N=45,31,20,14,14 |
JPY 36,134 | USD 249.20 | ||
| 33421 |
33421-35071 |
GEAR, COUNTER | 1980/08 - 1983/08 | LN3#,4# N=45,31,20,14,12 |
JPY 41,196 | USD 284.11 | ||
| 33421 |
33421-35072 |
GEAR, COUNTER | 1983/08 - 1984/01 | LN30,40 | JPY 39,227 | USD 270.53 | ||
| 33428 |
33046-35020 |
GEAR, COUNTERSHAFT 5TH | 1979/12 - 1980/08 | LN30,40 N=48 |
JPY 24,043 | USD 165.81 | ||
| 33428 |
33046-35030 |
GEAR, COUNTERSHAFT 5TH | 1980/08 - 1980/10 | LN30,40 N=48 |
JPY 22,074 | USD 152.24 | ||
| 33428 |
33046-35040 |
GEAR, COUNTERSHAFT 5TH | 1980/10 - 1983/12 | LN30,40 N=48 |
JPY 21,934 | USD 151.27 | ||
| 33428B |
90364-32004 |
BEARING (FOR COUNTER 5TH GEAR) | 1979/12 - 1980/08 | LN30,40 | CONTACT US | CONTACT US | ||
| 33428B |
90364-26002 |
BEARING (FOR COUNTER 5TH GEAR) | 1980/08 - 1985/08 | LN3#,4# | JPY 3,220 | USD 22.21 | ||
| 33451 |
33451-35020 |
SHAFT, REVERSE IDLER GEAR | 1979/12 - 1984/01 | LN3#,4# | JPY 2,461 | USD 16.97 | ||
| 33452 |
33452-36020 |
STOPPER, REVERSE IDLER GEAR SHAFT | 1979/12 - 1985/08 | LN3#,4# | JPY 380 | USD 2.62 | ||
| 33481 |
33481-22010 |
GEAR, SPEEDOMETER DRIVE (MTM) | 1979/12 - 1988/09 | LN30,40,41 歯数=6,マーク 6X18-20,N=6 |
JPY 1,743 | USD 12.02 | ||
| 33481A |
90360-06004 |
KEY OR BALL, SPEEDOMETER DRIVE GEAR (MTM) | 1978/09 - 1988/09 | LN30,40,41,RN30,33,35,4# | JPY 112 | USD 0.78 | ||
| 33481B |
90520-26179 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1979/12 - 1985/08 | LN30,40 厚さ=1.50,外径=31.3 |
JPY 309 | USD 2.13 |