Select parts.
| car name | 211130 MR-S (1999/10 - 2007/07) | |
|---|---|---|
| model name | ZZW30-AKMQH (1999/10 - 2002/08) | |
| ENGINE 1 | 1ZZFE | 1800CC 16-VALVE DOHC EFI |
| BODY | CVT | CONVERTIBLE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| FUEL INDUCTION | HTWC | HIGH EFFICIENCY TWIN CAM |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33038E |
33038-20010 |
RING SET, SYNCHRONIZER, NO.2 | 1999/10 - 2002/08 | ZZW30..5F | JPY 7,171 | USD 49.45 | ||
| 33111R |
90520-57002 |
RING, HOLE SNAP(FOR OUTPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 | JPY 239 | USD 1.65 | ||
| 33125 |
33125-12011 |
RECEIVER, MANUAL TRANSAXLE CASE | 1999/10 - 2002/08 | ZZW30 | JPY 211 | USD 1.45 | ||
| 33125A |
91611-B0812 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 1999/10 - 2002/08 | ZZW30 | JPY 84 | USD 0.58 | ||
| 33134B |
33134-12022 |
COVER, OUTPUT SHAFT(MTM) | 1999/10 - 2002/08 | ZZW30 | JPY 295 | USD 2.04 | ||
| 33151D |
33151-12021 |
RETAINER, BEARING, REAR(MTM) | 1999/10 - 2002/01 | ZZW30 | JPY 5,019 | USD 34.62 | ||
| 33151D |
33151-52010 |
RETAINER, BEARING, REAR(MTM) | 2002/01 - 2002/08 | ZZW30 | JPY 3,149 | USD 21.72 | ||
| 33151E |
90119-08944 |
BOLT(FOR REAR BEARING RETAINER) | 1999/10 - 2002/08 | ZZW30 | JPY 112 | USD 0.78 | ||
| 33311 |
33311-12180 |
SHAFT, INPUT | 1999/10 - 2002/04 | ZZW30 | JPY 41,477 | USD 286.05 | ||
| 33311 |
33311-12181 |
SHAFT, INPUT | 2002/04 - 2002/08 | ZZW30 | JPY 39,368 | USD 271.50 | ||
| 33311A |
90365-25021 |
BEARING (FOR INPUT SHAFT FRONT) | 1999/10 - 2002/08 | ZZW30 | JPY 2,053 | USD 14.16 | ||
| 33311E |
90363-25048 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1999/10 - 2002/08 | ZZW30 | JPY 3,234 | USD 22.30 | ||
| 33311P |
90520-22006 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.29-2.34,マーク A |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22007 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.35-2.40,マーク B |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.41-2.46,マーク C |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.47-2.52,マーク D |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.53-2.58,マーク E |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22011 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.59-2.64,マーク F |
JPY 141 | USD 0.97 | ||
| 33311X |
90520-64002 |
RING, HOLE SNAP (FOR INPUT SHAFT REAR BEARING) | 1999/10 - 2002/08 | ZZW30 | JPY 239 | USD 1.65 | ||
| 33321 |
33321-20160 |
SHAFT, OUTPUT | 1999/10 - 2002/08 | ZZW30 | JPY 19,403 | USD 133.81 | ||
| 33321A |
90363-25067 |
BEARING (FOR OUTPUT SHAFT REAR) | 1999/10 - 2002/08 | ZZW30 | JPY 3,051 | USD 21.04 | ||
| 33321G |
90179-18005 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 1999/10 - 2002/08 | ZZW30 |
JPY 239 | USD 1.65 | ||
| 33321N |
90365-33006 |
BEARING (FOR OUTPUT SHAFT FRONT) | 1999/10 - 2002/08 | ZZW30 | JPY 4,640 | USD 32.00 | ||
| 33321Y |
90520-30002 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=1.95-1.99,マーク 1 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30003 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.00-2.04,マーク 2 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30004 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.05-2.09,マーク 3 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30005 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.10-2.14,マーク 4 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.15-2.19,マーク 5 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30007 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.20-2.24,マーク 6 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30032 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=1.85-1.89,マーク 7 |
JPY 98 | USD 0.68 | ||
| 33321Y |
90520-30033 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 1999/10 - 2002/08 | ZZW30 厚さ=1.90-1.94,マーク 8 |
JPY 98 | USD 0.68 | ||
| 33326 |
33326-12010 |
PLATE, BEARING LOCK | 1999/10 - 2002/08 | ZZW30 | JPY 323 | USD 2.23 | ||
| 33326A |
91611-B0812 |
BOLT (FOR BEARING LOCK PLATE) | 1999/10 - 2002/08 | ZZW30 | JPY 84 | USD 0.58 | ||
| 33331 |
33331-20070 |
GEAR, REVERSE | 1999/10 - 2002/08 | ZZW30 | JPY 16,872 | USD 116.36 | ||
| 33332 |
33332-20120 |
GEAR, 2ND | 1999/10 - 2002/08 | ZZW30 | JPY 14,763 | USD 101.81 | ||
| 33332B |
90364-32014 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1999/10 - 2002/08 | ZZW30 | JPY 2,348 | USD 16.19 | ||
| 33332C |
90560-32008 |
SPACER (FOR 2ND GEAR BEARING) | 1999/10 - 2002/08 | ZZW30 | JPY 127 | USD 0.87 | ||
| 33333 |
33034-12130 |
GEAR, 3RD | 1999/10 - 2002/08 | ZZW30 | JPY 15,325 | USD 105.69 | ||
| 33333A |
90364-31002 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1999/10 - 2002/08 | ZZW30 | JPY 2,151 | USD 14.84 | ||
| 33334 |
33035-20130 |
GEAR, 4TH | 1999/10 - 2000/05 | ZZW30 | JPY 15,325 | USD 105.69 | ||
| 33334 |
33035-20170 |
GEAR, 4TH | 2000/05 - 2002/08 | ZZW30 | JPY 15,325 | USD 105.69 | ||
| 33334A |
90364-29002 |
BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 1999/10 - 2002/08 | ZZW30 | JPY 1,701 | USD 11.73 | ||
| 33334B |
90560-29001 |
SPACER (FOR 4TH GEAR BEARING) | 1999/10 - 2002/08 | ZZW30 | JPY 98 | USD 0.68 | ||
| 33335 |
33032-12070 |
GEAR, 1ST | 1999/10 - 2002/08 | ZZW30 | JPY 19,965 | USD 137.69 | ||
| 33335C |
90364-38007 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1999/10 - 2002/08 | ZZW30 | JPY 2,700 | USD 18.62 | ||
| 33336 |
33036-20070 |
GEAR, 5TH | 1999/10 - 2002/08 | ZZW30 | JPY 17,575 | USD 121.21 | ||
| 33336A |
90364-24006 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 1999/10 - 2002/08 | ZZW30 | JPY 1,982 | USD 13.67 | ||
| 33336B |
90560-25006 |
SPACER (FOR 5TH GEAR BEARING) | 1999/10 - 2002/08 | ZZW30 | JPY 98 | USD 0.68 | ||
| 33348 |
33348-12010 |
WASHER, 1ST GEAR THRUST | 1999/10 - 2002/08 | ZZW30 | JPY 506 | USD 3.49 | ||
| 33348A |
90360-05012 |
PIN OR BALL (FOR 1ST GEAR THRUST WASHER) | 1999/10 - 2002/08 | ZZW30 | JPY 127 | USD 0.87 | ||
| 33361 |
33361-20050 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1999/10 - 2002/08 | ZZW30 | JPY 8,155 | USD 56.24 | ||
| 33361B |
90520-29018 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.50-2.55,マーク A |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29019 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.56-2.61,マーク B |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29020 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.62-2.67,マーク C |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29021 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.68-2.73,マーク D |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29022 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.74-2.79,マーク E |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29023 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1999/10 - 2002/08 | ZZW30 厚さ=2.80-2.85,マーク F |
JPY 141 | USD 0.97 | ||
| 33362 |
33362-12040 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1999/10 - 2002/08 | ZZW30 | JPY 7,030 | USD 48.48 | ||
| 33362A |
90520-27046 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.30-2.35,マーク 0 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27047 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.36-2.41,マーク 1 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27048 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.42-2.47,マーク 2 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27049 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.48-2.53,マーク 3 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27050 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.54-2.59,マーク 4 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27051 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1999/10 - 2002/08 | ZZW30 厚さ=2.60-2.65,マーク 5 |
JPY 127 | USD 0.87 | ||
| 33364 |
33364-20050 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1999/10 - 2001/06 | ZZW30 | JPY 8,717 | USD 60.12 | ||
| 33364 |
33364-20051 |
SLEEVE, TRANSMISSION HUB, NO.2 | 2001/06 - 2002/08 | ZZW30 | JPY 8,717 | USD 60.12 | ||
| 33365 |
33365-12051 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1999/10 - 2002/08 | ZZW30 | JPY 309 | USD 2.13 | ||
| 33366 |
33366-12041 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1999/10 - 2002/08 | ZZW30 | JPY 337 | USD 2.33 | ||
| 33367 |
33367-20070 |
RING, SYNCHRONIZER, NO.1 | 1999/10 - 2002/08 | ZZW30 | JPY 3,149 | USD 21.72 | ||
| 33368G |
33368-20060 |
RING, SYNCHRONIZER (FOR 3RD GEAR) | 1999/10 - 2001/03 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33368G |
33368-20061 |
RING, SYNCHRONIZER (FOR 3RD GEAR) | 2001/03 - 2002/08 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33368H |
33368-20070 |
RING, SYNCHRONIZER (FOR 4TH GEAR) | 1999/10 - 2000/11 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33368H |
33368-20071 |
RING, SYNCHRONIZER (FOR 4TH GEAR) | 2000/11 - 2002/08 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33369 |
33369-20040 |
RING, SYNCHRONIZER, NO.3 | 1999/10 - 2002/08 | ZZW30 | JPY 2,517 | USD 17.36 | ||
| 33371 |
33371-12040 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1999/10 - 2002/08 | ZZW30 | JPY 141 | USD 0.97 | ||
| 33391 |
33391-12040 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1999/10 - 2002/08 | ZZW30 | JPY 141 | USD 0.97 | ||
| 33392 |
33391-12030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1999/10 - 2002/08 | ZZW30 | JPY 169 | USD 1.16 | ||
| 33393 |
33393-12031 |
HUB, TRANSMISSION CLUTCH, NO.3 | 1999/10 - 2002/08 | ZZW30 | JPY 6,524 | USD 44.99 | ||
| 33393A |
90520-18002 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.25-2.30,マーク A |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18003 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.31-2.36,マーク B |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18004 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.37-2.42,マーク C |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18006 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.43-2.48,マーク D |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18007 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.49-2.54,マーク E |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18008 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.55-2.60,マーク F |
JPY 112 | USD 0.78 | ||
| 33393A |
90520-18009 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1999/10 - 2002/08 | ZZW30 厚さ=2.61-2.66,マーク G |
JPY 112 | USD 0.78 | ||
| 33394 |
33394-12011 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 1999/10 - 2002/08 | ZZW30 | JPY 394 | USD 2.72 | ||
| 33395 |
33395-20040 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1999/10 - 2002/08 | ZZW30 | JPY 7,592 | USD 52.36 | ||
| 33402 |
33402-12041 |
GEAR SUB-ASSY, REVERSE IDLER | 1999/10 - 2002/08 | ZZW30 | JPY 14,904 | USD 102.78 | ||
| 33422B |
33422-10040 |
GEAR, 4TH DRIVEN | 1999/10 - 2002/08 | ZZW30 | JPY 12,654 | USD 87.27 | ||
| 33423A |
33423-12040 |
GEAR, 3RD DRIVEN | 1999/10 - 2002/08 | ZZW30 | JPY 11,248 | USD 77.57 | ||
| 33428C |
33428-12050 |
GEAR, 5TH DRIVEN | 1999/10 - 2002/08 | ZZW30 | JPY 12,654 | USD 87.27 | ||
| 33431C |
33431-12010 |
SPACER, OUTPUT GEAR | 1999/10 - 2002/08 | ZZW30 | JPY 998 | USD 6.89 | ||
| 33451 |
33451-12021 |
SHAFT, REVERSE IDLER GEAR | 1999/10 - 2002/08 | ZZW30 | JPY 1,392 | USD 9.60 | ||
| 33451H |
90109-08097 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1999/10 - 2002/08 | ZZW30 | JPY 183 | USD 1.26 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 1999/10 - 2002/08 | ZZW30 | JPY 84 | USD 0.58 | ||
| 33462 |
33462-12010 |
WASHER, REVERSE IDLER THRUST | 1999/10 - 2002/08 | ZZW30 | JPY 267 | USD 1.84 |