Select parts.
| car name | 751160 DYNA 200/TOYOACE G25 (1995/05 - 2000/05) | |
|---|---|---|
| model name | BU162A-TMMMS3 (1995/05 - 1999/05) | |
| ENGINE 1 | 15BF | 4100CC DIESEL |
| BODY | DMP | DUMP |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| DECK,CAB | DM7 | DUMP,REINFORCED TYPE(3.1M) |
| SEATING CAPACITY | 02S | 2-SEATER |
| REAR TIRE | WT | DOUBLE TIRE |
| LOADING CAPACITY | 20T | 2 TONS |
| FUEL INDUCTION | DSL | DIESEL |
| BUILDING CONDITION | IV3 | INCOMPLETE VEHICLES (CAB & CHASSIS) |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33481P |
33481-36220 |
GEAR, SPEEDOMETER DRIVE (FOR TRANSFER) | 1995/05 - 1999/05 | BU172,182..30T BU162,172..DM5,DM7,TW1 歯数=6,マーク 6:23-25 |
JPY 4,134 | USD 28.51 | ||
| 33481Q |
90360-06004 |
KEY OR BALL, SPEEDOMETER DRIVE GEAR (FOR TRANSFER) | 1995/05 - 1999/06 | BU162,172,182 |
JPY 112 | USD 0.78 | ||
| 36155A |
36155-36010 |
RING, TRANSFER OIL SEAL | 1995/05 - 1999/06 | BU162,172,182 外側 |
JPY 1,814 | USD 12.51 | ||
| 36155A |
36155-36020 |
RING, TRANSFER OIL SEAL | 1995/05 - 1999/06 | BU162,172,182 内側 |
JPY 914 | USD 6.30 | ||
| 36202 |
36202-36010 |
SHAFT SUB-ASSY, TRANSFER OUTPUT, REAR | 1995/05 - 1999/06 | BU162,172,182 | JPY 52,725 | USD 363.62 | ||
| 36202A |
90179-24011 |
NUT(FOR TRANSFER OUTPUT REAR SHAFT) | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 281 | USD 1.94 | ||
| 36202B |
90301-31003 |
RING, O(FOR TRANSFER OUTPUT REAR SHAFT) | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 267 | USD 1.84 | ||
| 36203 |
36203-60071 |
GEAR SUB-ASSY, TRANSFER HIGH SPEED OUTPUT | 1995/05 - 1998/01 | BU162,172,182 | JPY 33,603 | USD 231.75 | ||
| 36203 |
36203-60110 |
GEAR SUB-ASSY, TRANSFER HIGH SPEED OUTPUT | 1998/01 - 1999/06 | BU162,172,182..CBU,IV3 | JPY 34,025 | USD 234.66 | ||
| 36204 |
36204-60090 |
GEAR SUB-ASSY, TRANSFER LOW SPEED OUTPUT | 1995/05 - 1999/06 | BU162,172,182 | JPY 39,368 | USD 271.50 | ||
| 36211 |
36211-60030 |
SHAFT, TRANSFER INPUT | 1995/05 - 1998/01 | BU162,172,182,297..CBU,IV3 | JPY 10,264 | USD 70.79 | ||
| 36212 |
36212-60100 |
GEAR, TRANSFER INPUT | 1995/05 - 1998/01 | BU162,172,182,297 | JPY 26,855 | USD 185.20 | ||
| 36212 |
36212-60120 |
GEAR, TRANSFER INPUT | 1998/01 - 1999/06 | BU162,172,182,297..CBU,IV3 | JPY 10,826 | USD 74.66 | ||
| 36212A |
90363-35030 |
BEARING, RADIAL BALL (FOR TRANSFER INPUT GEAR) | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 3,585 | USD 24.73 | ||
| 36212C |
90520-82001 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=1.65 |
JPY 267 | USD 1.84 | ||
| 36212D |
90520-32005 |
RING, SHAFT SNAP (FOR TRANSFER INPUT BEARING) | 1995/05 - | BU162,172,182,297..CBU,IV3 厚さ=2.0,マーク A |
JPY 141 | USD 0.97 | ||
| 36212D |
90520-32006 |
RING, SHAFT SNAP (FOR TRANSFER INPUT BEARING) | 1995/05 - | BU162,172,182,297..CBU,IV3 厚さ=2.1,マーク B |
JPY 155 | USD 1.07 | ||
| 36212D |
90520-32007 |
RING, SHAFT SNAP (FOR TRANSFER INPUT BEARING) | 1995/05 - | BU162,172,182,297..CBU,IV3 厚さ=2.2,マーク C |
JPY 155 | USD 1.07 | ||
| 36212D |
90520-32008 |
RING, SHAFT SNAP (FOR TRANSFER INPUT BEARING) | 1995/05 - | BU162,172,182,297..CBU,IV3 厚さ=2.3,マーク D |
JPY 155 | USD 1.07 | ||
| 36212D |
90520-32009 |
RING, SHAFT SNAP (FOR TRANSFER INPUT BEARING) | 1995/05 - | BU162,172,182,297..CBU,IV3 厚さ=2.4,マーク E |
JPY 169 | USD 1.16 | ||
| 36212F |
90363-50003 |
BEARING, RADIAL BALL (FOR TRANSFER INPUT SHAFTFRONT) | 1995/05 - 1999/06 | BU162,172,182,297 |
JPY 3,557 | USD 24.53 | ||
| 36212L |
90520-46004 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=2.90-2.95,マーク A |
JPY 169 | USD 1.16 | ||
| 36212L |
90520-46005 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=2.95-3.00,マーク B |
JPY 169 | USD 1.16 | ||
| 36212L |
90520-46006 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=3.00-3.05,マーク C |
JPY 169 | USD 1.16 | ||
| 36212L |
90520-46007 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=3.05-3.10,マーク D |
JPY 169 | USD 1.16 | ||
| 36212L |
90520-46008 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=3.10-3.15,マーク E |
JPY 169 | USD 1.16 | ||
| 36212L |
90520-46009 |
RING, SHAFT SNAP | 1998/01 - | BU162,172,182,297 厚さ=3.15-3.20,マーク F |
JPY 169 | USD 1.16 | ||
| 36213B |
90520-44022 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.0,マーク A |
JPY 197 | USD 1.36 | ||
| 36213B |
90520-44023 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.1,マーク B |
JPY 197 | USD 1.36 | ||
| 36213B |
90520-44024 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.2,マーク C |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44025 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.3,マーク D |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44026 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.4,マーク E |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44027 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.5,マーク F |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44028 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.6,マーク G |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44029 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.7,マーク H |
JPY 211 | USD 1.45 | ||
| 36213B |
90520-44030 |
RING, SHAFT SNAP (FOR TRANSFER INPUT GEAR STOPPER) | 1995/05 - 1998/01 | BU162,172,182,297 厚さ=2.8,マーク J |
JPY 211 | USD 1.45 | ||
| 36221 |
36221-60110 |
GEAR, TRANSFER IDLER | 1995/05 - 1998/01 | BU162,172,182 | JPY 65,379 | USD 450.89 | ||
| 36221 |
36221-60150 |
GEAR, TRANSFER IDLER | 1998/01 - 1999/06 | BU162,172,182..CBU,IV3 | JPY 75,502 | USD 520.71 | ||
| 36221B |
90366-35059 |
BEARING (FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 | JPY 3,487 | USD 24.05 | ||
| 36221D |
90201-61014 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.30,マーク B |
JPY 197 | USD 1.36 | ||
| 36221D |
90201-61015 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.45,マーク C |
JPY 197 | USD 1.36 | ||
| 36221D |
90201-61016 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.00,マーク D |
JPY 309 | USD 2.13 | ||
| 36221D |
90201-61017 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.20,マーク E |
JPY 309 | USD 2.13 | ||
| 36221D |
90201-61018 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.40,マーク F |
JPY 309 | USD 2.13 | ||
| 36221D |
90201-61019 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.60,マーク G |
JPY 309 | USD 2.13 | ||
| 36221D |
90201-61020 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.80,マーク H |
JPY 337 | USD 2.33 | ||
| 36221D |
90201-61021 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.00,マーク J |
JPY 337 | USD 2.33 | ||
| 36221D |
90201-61022 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.20,マーク K |
JPY 337 | USD 2.33 | ||
| 36221D |
90201-61023 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.40,マーク L |
JPY 337 | USD 2.33 | ||
| 36221D |
90201-61024 |
WASHER, PLATE(FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.55,マーク M |
JPY 155 | USD 1.07 | ||
| 36221E |
90366-33001 |
BEARING, RADIAL BALL (FOR TRANSFER IDLER GEAR) | 1995/05 - 1999/06 | BU162,172,182 | JPY 2,503 | USD 17.26 | ||
| 36231C |
90366-35058 |
BEARING, TAPER ROLLER (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 フロント |
JPY 3,164 | USD 21.82 | ||
| 36231C |
90366-38007 |
BEARING, TAPER ROLLER (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 リヤ |
JPY 3,164 | USD 21.82 | ||
| 36231E |
90364-42001 |
BEARING, NEEDLE ROLLER (FOR TRANSFER OUTPUT SHAFT FRONT) | 1995/05 - 1999/06 | BU162,172,182 フロント |
JPY 2,109 | USD 14.55 | ||
| 36231E |
90364-43005 |
BEARING, NEEDLE ROLLER (FOR TRANSFER OUTPUT SHAFT FRONT) | 1995/05 - 1999/06 | BU162,172,182 リヤ |
JPY 2,109 | USD 14.55 | ||
| 36231F |
90520-32005 |
RING, SHAFT SNAP (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.0,マーク A |
JPY 141 | USD 0.97 | ||
| 36231F |
90520-32006 |
RING, SHAFT SNAP (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.1,マーク B |
JPY 155 | USD 1.07 | ||
| 36231F |
90520-32007 |
RING, SHAFT SNAP (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.2,マーク C |
JPY 155 | USD 1.07 | ||
| 36231F |
90520-32008 |
RING, SHAFT SNAP (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.3,マーク D |
JPY 155 | USD 1.07 | ||
| 36231F |
90520-32009 |
RING, SHAFT SNAP (FOR TRANSFER OUTPUT SHAFT) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.4,マーク E |
JPY 169 | USD 1.16 | ||
| 36231H |
90363-40044 |
BEARING, RADIAL BALL (FOR TRANSFER OUTPUT SHAFT FRONT) | 1995/05 - 1999/06 | BU162,172,182,297 |
JPY 3,220 | USD 22.21 | ||
| 36231J |
90363-38002 |
BEARING, RADIAL BALL (FOR TRANSFER OUTPUT SHAFT REAR) | 1995/05 - 1999/06 | BU162,172,182 |
JPY 2,475 | USD 17.07 | ||
| 36231K |
90201-76002 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.29-0.31,マーク 2 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76003 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.44-0.46,マーク 3 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76004 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.99-1.01,マーク 4 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76005 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.19-1.21,マーク 5 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76006 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.39-1.41,マーク 6 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76007 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.59-1.61,マーク 7 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76008 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.79-1.81,マーク 8 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76009 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=1.99-2.01,マーク 9 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76010 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.19-2.21,マーク 10 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76011 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.39-2.41,マーク 11 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76012 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.59-2.61,マーク 12 |
JPY 464 | USD 3.20 | ||
| 36231K |
90201-76013 |
WASHER, PLATE(FOR TRANSFER OUTPUT REAR CASE) | 1995/05 - 1999/06 | BU162,172,182 厚さ=0.51-0.59,マーク 13 |
JPY 464 | USD 3.20 | ||
| 36234B |
90521-84002 |
RING, SNAP (FOR TRANSFER OUTPUT FRONT SHAFT BEARING) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=1.7,マーク A |
JPY 211 | USD 1.45 | ||
| 36234B |
90521-84003 |
RING, SNAP (FOR TRANSFER OUTPUT FRONT SHAFT BEARING) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=1.8,マーク B |
JPY 225 | USD 1.55 | ||
| 36235 |
36235-60040 |
SLEEVE, TRANSFER HIGH & LOW CLUTCH | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 3,206 | USD 22.11 | ||
| 36236 |
36236-60060 |
SLEEVE, FRONT DRIVE CLUTCH | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 1,870 | USD 12.90 | ||
| 36237 |
36237-60030 |
HUB, TRANSFER CLUTCH | 1995/05 - 1998/01 | BU162,172,182 | JPY 8,858 | USD 61.09 | ||
| 36237 |
36237-60050 |
HUB, TRANSFER CLUTCH | 1998/01 - 1998/06 | BU162,172,182..CBU,IV3 | JPY 3,332 | USD 22.98 | ||
| 36237 |
36237-60050 |
HUB, TRANSFER CLUTCH | 1998/06 - 1999/06 | BU162,172,182 | JPY 3,332 | USD 22.98 | ||
| 36237A |
90520-39015 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.60,マーク A |
JPY 197 | USD 1.36 | ||
| 36237A |
90520-39016 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.65,マーク B |
JPY 211 | USD 1.45 | ||
| 36237A |
90520-39017 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.70,マーク C |
JPY 211 | USD 1.45 | ||
| 36237A |
90520-39018 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.75,マーク D |
JPY 211 | USD 1.45 | ||
| 36237A |
90520-39019 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.80,マーク E |
JPY 211 | USD 1.45 | ||
| 36237A |
90520-39020 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.85,マーク F |
JPY 211 | USD 1.45 | ||
| 36237A |
90520-39021 |
RING, SHAFT SNAP (FOR TRANSFER CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182 厚さ=2.90,マーク G |
JPY 211 | USD 1.45 | ||
| 36239 |
36239-60010 |
HUB, TRANSFER DRIVE CLUTCH | 1995/05 - 1999/06 | BU162,172,182,297 | JPY 1,982 | USD 13.67 | ||
| 36239A |
90520-36019 |
RING, SHAFT SNAP(FOR TRANSFER DRIVE CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=1.8,マーク A |
JPY 155 | USD 1.07 | ||
| 36239A |
90520-36020 |
RING, SHAFT SNAP(FOR TRANSFER DRIVE CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=1.9,マーク B |
JPY 155 | USD 1.07 | ||
| 36239A |
90520-36021 |
RING, SHAFT SNAP(FOR TRANSFER DRIVE CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=2.0,マーク C |
JPY 169 | USD 1.16 | ||
| 36239A |
90520-36022 |
RING, SHAFT SNAP(FOR TRANSFER DRIVE CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=2.1,マーク D |
JPY 169 | USD 1.16 | ||
| 36239A |
90520-36023 |
RING, SHAFT SNAP(FOR TRANSFER DRIVE CLUTCH HUB) | 1995/05 - 1999/06 | BU162,172,182,297 厚さ=2.2,マーク E |
JPY 169 | USD 1.16 | ||
| 36245 |
36245-60010 |
PIECE, TRANSFER FRONT DRIVE GEAR | 1995/05 - 1999/06 | BU162,172,182 | JPY 8,155 | USD 56.24 |