Select parts.
| car name | 751190 DYNA/TOYOACE (2011/07 - ) | |
|---|---|---|
| model name | TRC600-PQMMK3 (2011/07 - 2016/05) | |
| ENGINE 1 | 2TRFE | 2700CC 16-VALVE DOHC EFI |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| CAB | DCB | DOUBLE CAB |
| DECK,CAB | T4 | FULL JUST LOW |
| LOADING CAPACITY | 20T | 2 TONS |
| REAR TIRE | WT | DOUBLE TIRE |
| FUEL INDUCTION | EFI | ELECTRIC FUEL INJECTION SYSTEM |
| BUILDING CONDITION | IV3 | INCOMPLETE VEHICLES (CAB & CHASSIS) |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33311 |
33301-37050 |
SHAFT, INPUT | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 21,934 | USD 151.27 | ||
| 33311A |
90363-45010 |
BEARING (FOR INPUT SHAFT FRONT) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 3,782 | USD 26.08 | ||
| 33311B |
90520-42002 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.50-2.55,MARK 2 |
JPY 169 | USD 1.16 | ||
| 33311B |
90520-42003 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.55-2.60,MARK 3 |
JPY 169 | USD 1.16 | ||
| 33311B |
90520-42004 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.60-2.65,MARK 4 |
JPY 169 | USD 1.16 | ||
| 33311B |
90520-42005 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.65-2.70,MARK 5 |
JPY 169 | USD 1.16 | ||
| 33311B |
90520-42006 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.70-2.75,MARK 6 |
JPY 169 | USD 1.16 | ||
| 33311B |
90520-42007 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.75-2.80,MARK 7 |
JPY 169 | USD 1.16 | ||
| 33311C |
96151-04500 |
RING, HOLE SNAP (FOR NEEDLE ROLLER) | 2011/07 - 2016/05 | TRC600..T4 TRU600..T4..IV3 |
JPY 169 | USD 1.16 | ||
| 33311D |
90361-09002 |
BEARING, INPUT SHAFT | 2011/07 - 2016/05 | TRC600..T4 TRU600..T4..IV3 |
JPY 239 | USD 1.65 | ||
| 33311F |
90560-38004 |
SPACER (FOR INPUT SHAFT) | 2011/07 - 2016/05 | TRC600..T4 TRU600..T4..IV3 |
JPY 183 | USD 1.26 | ||
| 33311G |
90520-96001 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 239 | USD 1.65 | ||
| 33321 |
33321-37030 |
SHAFT, OUTPUT | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 22,355 | USD 154.18 | ||
| 33321A |
90363-40034 |
BEARING (FOR OUTPUT SHAFT REAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 3,501 | USD 24.14 |  |
|
| 33321B |
90520-88001 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.36-2.46 |
JPY 239 | USD 1.65 | ||
| 33321G |
90179-24008 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 2011/07 - | BZU600,TRC600,TRU600,XZC60#,645,655,XZU60#,64#,65#..5F |
JPY 281 | USD 1.94 | ||
| 33321K |
90301-31003 |
RING, O(FOR MANUAL TRANSMISSON OUTPUT SHAFT REAR SET NUT) | 2011/07 - | BZU600,TRC600,TRU600,XZC60#,645,655,XZU60#,64#,65#..5F |
JPY 267 | USD 1.84 | ||
| 33331 |
33331-37070 |
GEAR, REVERSE | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 12,935 | USD 89.21 | ||
| 33331A |
90364-54004 |
BEARING (FOR REVERSE GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 3,318 | USD 22.88 | ||
| 33332 |
33033-36080 |
GEAR, 2ND | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 22,355 | USD 154.18 | ||
| 33332B |
90364-54003 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,982 | USD 13.67 | ||
| 33333 |
33034-37010 |
GEAR, 3RD | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 12,513 | USD 86.30 | ||
| 33333A |
90364-47007 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,631 | USD 11.25 | ||
| 33335 |
33335-37040 |
GEAR, 1ST | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 18,700 | USD 128.96 | ||
| 33335C |
90364-58005 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,982 | USD 13.67 | ||
| 33336 |
33036-37010 |
GEAR, 5TH | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 10,967 | USD 75.63 | ||
| 33336A |
90364-37012 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,786 | USD 12.32 | ||
| 33336B |
90560-37003 |
SPACER (FOR 5TH GEAR BEARING) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 98 | USD 0.68 | ||
| 33338C |
90360-06004 |
BALL, REVERSE SHIFT RESTRICT | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 112 | USD 0.78 | ||
| 33342A |
90250-04056 |
PIN, STRAIGHT (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 98 | USD 0.68 | ||
| 33342B |
90520-34010 |
RING, SHAFT SNAP (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.90-2.95,マーク A |
JPY 127 | USD 0.87 | ||
| 33342B |
90520-34011 |
RING, SHAFT SNAP (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.95-3.00,マーク B |
JPY 127 | USD 0.87 | ||
| 33342B |
90520-34012 |
RING, SHAFT SNAP (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=3.00-3.05,マーク C |
JPY 127 | USD 0.87 | ||
| 33342B |
90520-34015 |
RING, SHAFT SNAP (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=3.05-3.10,マーク D |
JPY 127 | USD 0.87 | ||
| 33342B |
90520-34016 |
RING, SHAFT SNAP (FOR GEAR THRUST WASHER) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=3.10-3.15,マーク F |
JPY 127 | USD 0.87 | ||
| 33342C |
33342-36021 |
WASHER, 3RD GEAR THRUST | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,153 | USD 7.95 | ||
| 33354A |
33354-36010 |
RACE, REVERSE GEAR BEARING, INNER | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,968 | USD 13.58 | ||
| 33361 |
33361-37051 |
HUB, TRANSMISSION CLUTCH, NO.1 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 7,171 | USD 49.45 | ||
| 33362 |
33362-36050 |
HUB, TRANSMISSION CLUTCH, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 6,130 | USD 42.28 | ||
| 33362A |
90520-43002 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=1.90,マーク=2 |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-43003 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=1.95,マーク=3 |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-43004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.00,マーク=4 |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-43005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.05,マーク=5 |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-43006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.10,マーク=6 |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-43007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.15,マーク=7 |
JPY 169 | USD 1.16 | ||
| 33363 |
33363-37051 |
SLEEVE, TRANSMISSION HUB, NO.1 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 7,171 | USD 49.45 | ||
| 33364 |
33364-36061 |
SLEEVE, TRANSMISSION HUB, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 7,733 | USD 53.33 | ||
| 33365 |
33365-37040 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 267 | USD 1.84 | ||
| 33366 |
33366-36032 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 534 | USD 3.69 | ||
| 33367 |
33367-37020 |
RING, SYNCHRONIZER, NO.1 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 4,612 | USD 31.81 | ||
| 33368 |
33368-36051 |
RING, SYNCHRONIZER, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 4,274 | USD 29.48 | ||
| 33369 |
33369-36010 |
RING, SYNCHRONIZER, NO.3 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 3,852 | USD 26.57 | ||
| 33371 |
33371-36030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 295 | USD 2.04 | ||
| 33387A |
33387-37010 |
RING, REVERSE SYNCHRONIZER | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 4,612 | USD 31.81 | ||
| 33391 |
33391-36021 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 211 | USD 1.45 | ||
| 33392 |
33392-36010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 141 | USD 0.97 | ||
| 33393 |
33393-36060 |
HUB, TRANSMISSION CLUTCH, NO.3 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 3,993 | USD 27.54 | ||
| 33393A |
90520-28054 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=1.90-1.95,マーク 4 |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-28055 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=1.95-2.00,マーク 5 |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-28056 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.00-2.05,マーク 6 |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-28057 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.05-2.10,マーク 7 |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-28058 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.10-2.15,マーク 8 |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-28059 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.15-2.20,マーク 9 |
JPY 127 | USD 0.87 | ||
| 33394 |
33394-36020 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 281 | USD 1.94 | ||
| 33395 |
33395-36030 |
SLEEVE, TRANSMISSION HUB, NO.3 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 6,833 | USD 47.13 | ||
| 33402 |
33461-36090 |
GEAR SUB-ASSY, REVERSE IDLER | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 10,967 | USD 75.63 | ||
| 33411A |
90365-37006 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 2,390 | USD 16.48 | ||
| 33411H |
90363-30049 |
BEARING OR ROLLER(FOR COUNTER GEAR REAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 2,475 | USD 17.07 | ||
| 33411R |
90520-26030 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=1.95-2.00 |
JPY 127 | USD 0.87 | ||
| 33411R |
90520-26031 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.00-2.05 |
JPY 127 | USD 0.87 | ||
| 33411R |
90520-26032 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.05-2.10 |
JPY 127 | USD 0.87 | ||
| 33411R |
90520-26033 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.10-2.15 |
JPY 127 | USD 0.87 | ||
| 33411R |
90520-26034 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.15-2.20 |
JPY 127 | USD 0.87 | ||
| 33411R |
90520-26035 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2011/07 - 2016/05 | TRC600,TRU600 厚さ=2.20-2.25 |
JPY 127 | USD 0.87 | ||
| 33421 |
33421-37040 |
GEAR, COUNTER | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 43,586 | USD 300.59 | ||
| 33451 |
33451-36050 |
SHAFT, REVERSE IDLER GEAR | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 1,378 | USD 9.50 | ||
| 33451A |
90280-03002 |
KEY, WOODRUFF (FOR REVERSE IDLER GEAR SHAFT) | 2011/07 - 2016/05 | TRC600..T4 TRU600..T4..IV3 |
JPY 112 | USD 0.78 | ||
| 33461A |
90364-28018 |
BEARING, REVERSE IDLER GEAR | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 2,896 | USD 19.98 | ||
| 33462 |
33462-60020 |
WASHER, REVERSE IDLER THRUST | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 647 | USD 4.46 | ||
| 33464 |
33464-60010 |
WASHER, REVERSE IDLER THRUST, NO.2 | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 309 | USD 2.13 | ||
| 33481 |
33481-37020 |
GEAR, SPEEDOMETER DRIVE (MTM) | 2011/07 - 2016/05 | TRC600..T4 TRU600..T4..IV3 歯数=7,マーク 7X20-22 |
JPY 1,954 | USD 13.48 | ||
| 33481D |
33487-36070 |
SPACER (FOR SPEEDOMETER DRIVE GEAR) | 2011/07 - 2016/05 | TRC600,TRU600 | JPY 689 | USD 4.75 |