Select parts.
| car name | 671160 HILUX SURF (1995/11 - 2002/11) | |
|---|---|---|
| model name | KZN185G-GKMST (1995/11 - 1998/07) | |
| ENGINE 1 | 1KZTE | 3000CC DIESEL TURBO |
| BODY | NOB | NORMAL BODY |
| GRADE | SSR | SSR TYPE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| FUEL INDUCTION | TDE | TURBO DIESEL WITH EFI |
Select image size.
Enter the parts code or parts number
| 车零件代码 | 车零件编号 | 车零件名字 | Start - End | Note | PRICE/1 QTY(JPY) | 价钱/每个（美元） | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33037B |
33037-35010 |
RING SET, SYNCHRONIZER, NO.1 | 1995/11 - 1996/04 | KZN185..5F | JPY 7,874 | USD 54.30 | ||
| 33037B |
33037-60020 |
RING SET, SYNCHRONIZER, NO.1 | 1996/04 - 1998/01 | KZN185..5F | JPY 8,155 | USD 56.24 | ||
| 33037B |
33037-60040 |
RING SET, SYNCHRONIZER, NO.1 | 1998/01 - 2000/08 | KZN185..5F | JPY 5,610 | USD 38.69 | ||
| 33311 |
33301-35100 |
SHAFT, INPUT | 1995/11 - 1998/07 | KZN185..5F | JPY 29,104 | USD 200.72 | ||
| 33311A |
90363-40050 |
BEARING (FOR INPUT SHAFT FRONT) | 1995/11 - 2000/08 | KZN185..5F | JPY 3,501 | USD 24.14 | ||
| 33311B |
90520-38008 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.10,マーク A |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38009 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.15,マーク B |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38010 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.20,マーク C |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38011 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.25,マーク D |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38012 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.30,マーク E |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38013 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.35,マーク F |
JPY 127 | USD 0.87 | ||
| 33311B |
90520-38014 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.40,マーク G |
JPY 127 | USD 0.87 | ||
| 33311D |
90364-25012 |
BEARING, INPUT SHAFT | 1995/11 - 2000/08 | KZN185..5F | JPY 2,896 | USD 19.98 |   |
|
| 33311G |
90520-88001 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1995/11 - 2000/08 | KZN185..5F | JPY 239 | USD 1.65 | ||
| 33318 |
33318-35040 |
PIECE, GEAR SPLINE, NO.5 | 1995/11 - 2000/08 | KZN185..5F | JPY 3,881 | USD 26.76 | ||
| 33321 |
33321-35140 |
SHAFT, OUTPUT | 1995/11 - 2000/08 | KZN185..5F | JPY 22,777 | USD 157.08 | ||
| 33321A |
90363-30075 |
BEARING (FOR OUTPUT SHAFT REAR) | 1995/11 - 2000/08 | KZN185..5F | JPY 1,968 | USD 13.58 |   |
|
| 33321B |
90520-28031 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.65,マーク A |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28032 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.70,マーク B |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28033 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.75,マーク C |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28034 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.80,マーク D |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28035 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.85,マーク E |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28037 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.90,マーク F |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28039 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.95,マーク G |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28042 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.00,マーク H |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28043 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.05,マーク J |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28045 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.10,マーク K |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28046 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.15,マーク L |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28047 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.20,マーク M |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28048 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.25,マーク N |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28049 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.30,マーク P |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28050 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.35,マーク Q |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28051 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.40,マーク R |
JPY 127 | USD 0.87 | ||
| 33321B |
90520-28052 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.45,マーク S |
JPY 127 | USD 0.87 | ||
| 33321C |
90520-81001 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.65,内径=81.4 |
JPY 239 | USD 1.65 | ||
| 33321D |
90520-30014 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.80,マーク A |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30015 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.85,マーク B |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30016 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.90,マーク C |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30017 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.95,マーク D |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30018 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.00,マーク E |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30019 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.05,マーク F |
JPY 127 | USD 0.87 | ||
| 33321D |
90520-30020 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.10,マーク G |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36007 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.30,マーク A |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36008 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.35,マーク B |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36009 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.40,マーク C |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36010 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.45,マーク D |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36011 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.50,マーク E |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36012 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.55,マーク F |
JPY 127 | USD 0.87 | ||
| 33321M |
90520-36013 |
RING, SHAFT SNAP (FOR BEARING) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.60,マーク G |
JPY 127 | USD 0.87 | ||
| 33321T |
90561-30005 |
SPACER (FOR OUTPUT SHAFT) | 1995/11 - 2000/08 | KZN185..5F | JPY 872 | USD 6.01 |    |
|
| 33321V |
90363-35039 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1995/11 - 2000/08 | KZN185..5F | JPY 4,485 | USD 30.93 | ||
| 33331 |
33331-35070 |
GEAR, REVERSE | 1995/11 - 1996/04 | KZN185..5F | JPY 16,591 | USD 114.42 |    |
|
| 33331 |
33331-60040 |
GEAR, REVERSE | 1996/04 - 2000/08 | KZN185..5F | JPY 16,591 | USD 114.42 | ||
| 33332 |
33033-26030 |
GEAR, 2ND | 1995/11 - 2000/08 | KZN185..5F | JPY 19,965 | USD 137.69 | ||
| 33332B |
90364-47003 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1995/11 - 2000/08 | KZN185..5F | JPY 1,533 | USD 10.57 |    |
|
| 33333 |
33034-35080 |
GEAR, 3RD | 1995/11 - 1998/07 | KZN185..5F | JPY 17,575 | USD 121.21 | ||
| 33333A |
90364-38011 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1995/11 - 2000/08 | KZN185..5F | JPY 2,728 | USD 18.81 |    |
|
| 33335 |
33032-35040 |
GEAR, 1ST | 1995/11 - 1998/05 | KZN185..5F | JPY 23,480 | USD 161.93 | ||
| 33335 |
33032-35041 |
GEAR, 1ST | 1998/05 - 2000/08 | KZN185..5F | JPY 23,480 | USD 161.93 | ||
| 33335B |
90560-39002 |
SPACER(FOR 1ST GEAR BEARING) | 1995/11 - 2000/08 | KZN185..5F | JPY 169 | USD 1.16 | ||
| 33335C |
90364-39005 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1995/11 - 2000/08 | KZN185..5F | JPY 3,585 | USD 24.73 |   |
|
| 33336 |
33336-35100 |
GEAR, 5TH | 1995/11 - 2000/08 | KZN185..5F | JPY 8,717 | USD 60.12 | ||
| 33348 |
33348-35010 |
WASHER, 1ST GEAR THRUST | 1995/11 - 2000/08 | KZN185..5F | JPY 703 | USD 4.85 | ||
| 33348A |
90250-05026 |
PIN OR BALL (FOR 1ST GEAR THRUST WASHER) | 1995/11 - 2000/08 | KZN185..5F | JPY 98 | USD 0.68 | ||
| 33349 |
33346-35020 |
WASHER, 5TH GEAR THRUST | 1995/11 - 2000/08 | KZN185..5F | JPY 1,139 | USD 7.85 | ||
| 33349C |
90250-05026 |
PIN (FOR 5TH GEAR THRUST WASHER) | 1995/11 - 2000/08 | KZN185..5F | JPY 98 | USD 0.68 | ||
| 33361 |
33361-35040 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1995/11 - 2000/08 | KZN185..5F | JPY 7,592 | USD 52.36 | ||
| 33362 |
33362-35030 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1995/11 - 2000/08 | KZN185..5F | JPY 11,389 | USD 78.54 | ||
| 33364 |
33364-35050 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1995/11 - 2000/08 | KZN185..5F | JPY 8,155 | USD 56.24 | ||
| 33365 |
33365-35040 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1995/11 - 2000/08 | KZN185..5F | JPY 478 | USD 3.30 | ||
| 33365A |
90501-08158 |
SPRING, COMPRESSION | 1995/11 - 2000/08 | KZN185..5F | JPY 84 | USD 0.58 | ||
| 33366 |
33366-35030 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1995/11 - 2000/08 | KZN185..5F | JPY 323 | USD 2.23 | ||
| 33367 |
33367-35080 |
RING, SYNCHRONIZER, NO.1 | 1995/11 - 2000/08 | KZN185..5F | JPY 3,515 | USD 24.24 |  |
|
| 33368 |
33368-35030 |
RING, SYNCHRONIZER, NO.2 | 1995/11 - 2000/08 | KZN185..5F NO.1 |
JPY 4,204 | USD 28.99 | ||
| 33368 |
33368-35040 |
RING, SYNCHRONIZER, NO.2 | 1995/11 - 2000/08 | KZN185..5F NO.2 |
JPY 4,204 | USD 28.99 | ||
| 33384A |
33384-35011 |
RING, SYNCHRONIZER, OUTER NO.3 | 1995/11 - 2000/08 | KZN185..5F | JPY 5,048 | USD 34.81 |   |
|
| 33387A |
33387-35010 |
RING, REVERSE SYNCHRONIZER | 1995/11 - 1998/11 | KZN185..5F | JPY 5,048 | USD 34.81 | ||
| 33388A |
33388-35010 |
RING, REVERSE SYNCHRONIZER PULL | 1995/11 - 1998/01 | KZN185..5F | JPY 3,993 | USD 27.54 | ||
| 33388A |
33388-60010 |
RING, REVERSE SYNCHRONIZER PULL | 1998/01 - 2000/08 | KZN185..5F | JPY 4,007 | USD 27.64 | ||
| 33389 |
33389-35010 |
RING, SYNCHRONIZER CONE | 1995/11 - 1998/01 | KZN185..5F | JPY 4,555 | USD 31.42 | ||
| 33389 |
33389-60010 |
RING, SYNCHRONIZER CONE | 1998/01 - 2000/08 | KZN185..5F | JPY 4,541 | USD 31.32 | ||
| 33391 |
33391-35010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1995/11 - 1996/01 | KZN185..5F | JPY 169 | USD 1.16 | ||
| 33391 |
33391-25030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1996/01 - 2000/08 | KZN185..5F | JPY 155 | USD 1.07 | ||
| 33394B |
33394-35030 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 1995/11 - 2000/08 | KZN185..5F | JPY 408 | USD 2.81 | ||
| 33394C |
90501-07104 |
SPRING, COMPRESSION | 1995/11 - 2000/08 | KZN185,RZN185..5F | JPY 155 | USD 1.07 | ||
| 33395 |
33395-35031 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1995/11 - 2000/08 | KZN185..5F | JPY 9,842 | USD 67.88 | ||
| 33402 |
33402-35060 |
GEAR SUB-ASSY, REVERSE IDLER | 1995/11 - 2000/08 | KZN185..5F | JPY 10,967 | USD 75.63 | ||
| 33411A |
90365-25019 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 1995/11 - 2000/08 | KZN185..5F | JPY 6,271 | USD 43.25 |    |
|
| 33411D |
90520-56002 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 1995/11 - 2000/08 | KZN185..5F 厚さ=1.07,外径=62 |
JPY 169 | USD 1.16 | ||
| 33411P |
90365-34005 |
BEARING, COUNTER SHAFT CENTER | 1995/11 - 2000/08 | KZN185..5F | JPY 5,455 | USD 37.62 |   |
|
| 33411Q |
90520-23057 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.10,マーク A |
JPY 127 | USD 0.87 | ||
| 33411Q |
90520-23058 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.15,マーク B |
JPY 127 | USD 0.87 | ||
| 33411Q |
90520-23059 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.20,マーク C |
JPY 127 | USD 0.87 | ||
| 33411Q |
90520-23060 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.25,マーク D |
JPY 127 | USD 0.87 | ||
| 33411Q |
90520-23061 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.30,マーク E |
JPY 127 | USD 0.87 | ||
| 33411Q |
90520-23062 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1995/11 - 2000/08 | KZN185,RZN185..5F 厚さ=2.35,マーク F |
JPY 127 | USD 0.87 | ||
| 33421 |
33421-35210 |
GEAR, COUNTER | 1995/11 - 1998/07 | KZN185..5F | JPY 44,711 | USD 308.35 | ||
| 33421R |
90520-22016 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.85,マーク A |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22017 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.90,マーク B |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22018 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=2.95,マーク C |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22019 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.00,マーク D |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22020 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.05,マーク E |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22021 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.10,マーク F |
JPY 70 | USD 0.49 | ||
| 33421R |
90520-22022 |
RING, SHAFT SNAP(FOR COUNTER GEAR REAR) | 1995/11 - 2000/08 | KZN185..5F 厚さ=3.15,マーク G |
JPY 70 | USD 0.49 | ||
| 33428 |
33046-35090 |
GEAR, COUNTERSHAFT 5TH | 1995/11 - 2000/08 | KZN185..5F | JPY 23,340 | USD 160.96 | ||
| 33428B |
90364-30009 |
BEARING (FOR COUNTER 5TH GEAR) | 1995/11 - 2000/08 | KZN185..5F | JPY 2,896 | USD 19.98 |     |
|
| 33451 |
33451-35030 |
SHAFT, REVERSE IDLER GEAR | 1995/11 - 2000/08 | KZN185..5F | JPY 1,420 | USD 9.79 |
