Select parts.
| car name | 271120 CORONA (1987/12 - 1992/11) | |
|---|---|---|
| model name | AT170-AEKNU (1987/12 - 1989/11) | |
| ENGINE 1 | 5AF | 1500CC 16-VALVE DOHC |
| BODY | SED | SEDAN |
| GRADE | GX | GX TYPE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 4F | MTM, 4-SPEED FLOOR SHIFT |
| FUEL INDUCTION | CBR | CARBURETOR SYSTEM |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33111R |
90520-57002 |
RING, HOLE SNAP(FOR OUTPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 239 | USD 1.65 | ||
| 33125 |
33125-12010 |
RECEIVER, MANUAL TRANSAXLE CASE | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 492 | USD 3.39 | ||
| 33134B | 33134-12021 | COVER, OUTPUT SHAFT(MTM) | 1987/12 - 1992/11 | AT170,ET176..MTM | DISCONTINUED | DISCONTINUED | ||
| 33134C |
90254-10001 |
PIN, SLOTTED SPRING(FOR OUTPUT SHAFT) | 1987/12 - 1992/11 | AT170,CT17#,ET176,ST17#..MTM | JPY 211 | USD 1.45 | ||
| 33151D |
33151-12020 |
RETAINER, BEARING, REAR(MTM) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 4,977 | USD 34.33 | ||
| 33151E | 91611-60820 | BOLT(FOR REAR BEARING RETAINER) | 1987/12 - 1989/11 | AT170,ET176..MTM | DISCONTINUED | DISCONTINUED | ||
| 33311 |
33311-12051 |
SHAFT, INPUT | 1987/12 - 1991/04 | AT170,ET176..4F | JPY 41,758 | USD 287.99 | ||
| 33311A |
90365-25021 |
BEARING (FOR INPUT SHAFT FRONT) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 2,053 | USD 14.16 | ||
| 33311E |
90363-25048 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 3,234 | USD 22.30 | ||
| 33311P |
90520-22006 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.29-2.34,マーク A |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22007 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.35-2.40,マーク B |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.41-2.46,マーク C |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.47-2.52,マーク D |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.53-2.58,マーク E |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22011 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.59-2.64,マーク F |
JPY 141 | USD 0.97 | ||
| 33311X |
90520-64002 |
RING, HOLE SNAP (FOR INPUT SHAFT REAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 239 | USD 1.65 | ||
| 33321 |
33321-12051 |
SHAFT, OUTPUT | 1987/12 - 1992/02 | AT170..MTM | JPY 18,981 | USD 130.90 | ||
| 33321A |
90363-25029 |
BEARING (FOR OUTPUT SHAFT REAR) | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 3,403 | USD 23.47 | ||
| 33321G |
90179-18005 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 1987/12 - 1992/11 | AT170,ET176..MTM |
JPY 239 | USD 1.65 | ||
| 33321N |
90365-33005 |
BEARING (FOR OUTPUT SHAFT FRONT) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 4,260 | USD 29.38 | ||
| 33326 |
33326-12010 |
PLATE, BEARING LOCK | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 323 | USD 2.23 | ||
| 33331 |
33331-12020 |
GEAR, REVERSE | 1987/12 - 1989/08 | AT170,ET176..MTM | JPY 14,482 | USD 99.87 | ||
| 33331 |
33331-12021 |
GEAR, REVERSE | 1989/08 - 1991/04 | AT170,ET176..MTM | JPY 16,872 | USD 116.36 | ||
| 33332 |
33033-12010 |
GEAR, 2ND | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 25,308 | USD 174.54 | ||
| 33332B |
90364-32014 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 2,348 | USD 16.19 | ||
| 33332C |
90560-32008 |
SPACER (FOR 2ND GEAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 127 | USD 0.87 | ||
| 33333 |
33034-12020 |
GEAR, 3RD | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 23,761 | USD 163.87 | ||
| 33333A |
90364-31002 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 2,151 | USD 14.84 | ||
| 33334 |
33035-12011 |
GEAR, 4TH | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 14,482 | USD 99.87 | ||
| 33334A |
90364-29002 |
BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 1,701 | USD 11.73 | ||
| 33334B |
90560-29001 |
SPACER (FOR 4TH GEAR BEARING) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 98 | USD 0.68 | ||
| 33335 |
33032-12010 |
GEAR, 1ST | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 26,011 | USD 179.39 | ||
| 33335C |
90364-38007 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 2,700 | USD 18.62 | ||
| 33348 |
33348-12010 |
WASHER, 1ST GEAR THRUST | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 506 | USD 3.49 | ||
| 33348A |
90360-05012 |
PIN OR BALL (FOR 1ST GEAR THRUST WASHER) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 127 | USD 0.87 | ||
| 33361 |
33361-12030 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 4,359 | USD 30.06 | ||
| 33361B |
90520-29018 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.50-2.55,マーク A |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29019 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.56-2.61,マーク B |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29020 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.62-2.67,マーク C |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29021 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.68-2.73,マーク D |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29022 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.74-2.79,マーク E |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29023 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.80-2.85,マーク F |
JPY 141 | USD 0.97 | ||
| 33362 |
33362-12020 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 3,993 | USD 27.54 | ||
| 33362A |
90520-27046 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.30-2.35,マーク 0 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27047 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.36-2.41,マーク 1 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27048 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.42-2.47,マーク 2 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27049 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.48-2.53,マーク 3 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27050 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.54-2.59,マーク 4 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27051 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1987/12 - 1992/11 | AT170,ET176..MTM 厚さ=2.60-2.65,マーク 5 |
JPY 127 | USD 0.87 | ||
| 33364 |
33364-12010 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1987/12 - 1989/08 | AT170,ET176..MTM | JPY 8,577 | USD 59.15 | ||
| 33364 |
33364-12011 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1989/08 - 1992/11 | AT170,ET176..MTM | JPY 8,717 | USD 60.12 | ||
| 33365 |
33365-12021 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 380 | USD 2.62 | ||
| 33366 |
33366-12020 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 295 | USD 2.04 | ||
| 33367 |
33367-12031 |
RING, SYNCHRONIZER, NO.1 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 4,752 | USD 32.77 | ||
| 33368 |
33368-12020 |
RING, SYNCHRONIZER, NO.2 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 4,471 | USD 30.84 | ||
| 33371 |
33371-12020 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 281 | USD 1.94 | ||
| 33391 |
33391-12020 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 295 | USD 2.04 | ||
| 33402 |
33402-12021 |
GEAR SUB-ASSY, REVERSE IDLER | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 5,779 | USD 39.85 | ||
| 33422B |
33422-12010 |
GEAR, 4TH DRIVEN | 1987/12 - 1991/04 | AT170,ET176..MTM | JPY 12,935 | USD 89.21 | ||
| 33423A |
33423-12010 |
GEAR, 3RD DRIVEN | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 6,664 | USD 45.96 | ||
| 33431B |
33431-12020 |
SPACER, OUTPUT SHAFT | 1987/12 - 1992/11 | AT170,ET176..4F | JPY 1,743 | USD 12.02 | ||
| 33431C |
33431-12010 |
SPACER, OUTPUT GEAR | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 998 | USD 6.89 | ||
| 33451 |
33451-12021 |
SHAFT, REVERSE IDLER GEAR | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 1,392 | USD 9.60 | ||
| 33451H |
90109-08097 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 183 | USD 1.26 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 1987/12 - 1989/02 | AT17#,ET176..MTM | JPY 84 | USD 0.58 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 1989/02 - 1992/11 | AT17#,CT17#,ET176,ST17#..MTM | JPY 84 | USD 0.58 | ||
| 33462 |
33462-12010 |
WASHER, REVERSE IDLER THRUST | 1987/12 - 1992/11 | AT170,ET176..MTM | JPY 267 | USD 1.84 |