Select parts.
| car name | 271140 CORONA (1996/01 - 2001/12) | |
|---|---|---|
| model name | ST215-AEMEK (1996/01 - 2001/12) | |
| ENGINE 1 | 3SFE | 2000CC 16-VALVE DOHC EFI |
| GRADE | PRME | PREMIO E TYPE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| FUEL INDUCTION | EFI | ELECTRIC FUEL INJECTION SYSTEM |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33038E |
33038-12012 |
RING SET, SYNCHRONIZER, NO.2 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 8,436 | USD 58.18 | ||
| 33038E |
33038-33011 |
RING SET, SYNCHRONIZER, NO.2 | 1997/12 - 2001/12 | ST215..MTM | JPY 8,155 | USD 56.24 | ||
| 33039 |
33039-12011 |
RING SET, SYNCHRONIZER, NO.3 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 12,654 | USD 87.27 | ||
| 33111R |
90521-66004 |
RING, HOLE SNAP(FOR OUTPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 380 | USD 2.62 | ||
| 33125 |
33125-20010 |
RECEIVER, MANUAL TRANSAXLE CASE | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 239 | USD 1.65 | ||
| 33125 |
33326-21010 |
RECEIVER, MANUAL TRANSAXLE CASE | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 492 | USD 3.39 | ||
| 33125A |
91611-60616 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 309 | USD 2.13 | ||
| 33125A |
91611-60616 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 1997/12 - 2001/08 | CT211,ST215..MTM | JPY 309 | USD 2.13 | ||
| 33125A |
91611-B0616 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 2001/08 - 2001/12 | CT211,ST215..MTM | JPY 84 | USD 0.58 | ||
| 33134B |
33134-20010 |
COVER, OUTPUT SHAFT(MTM) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 647 | USD 4.46 | ||
| 33134B |
33134-33010 |
COVER, OUTPUT SHAFT(MTM) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 492 | USD 3.39 | ||
| 33151D |
33151-12031 |
RETAINER, BEARING, REAR(MTM) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 6,158 | USD 42.47 | ||
| 33151D |
33151-32012 |
RETAINER, BEARING, REAR(MTM) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 3,051 | USD 21.04 | ||
| 33151E |
90105-08237 |
BOLT(FOR REAR BEARING RETAINER) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 183 | USD 1.26 | ||
| 33151G |
90149-80029 |
SCREW(FOR REAR BEARING RETAINER) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 98 | USD 0.68 | ||
| 33311 |
33311-12150 |
SHAFT, INPUT | 1996/01 - 1997/12 | ST215..MTM | JPY 39,930 | USD 275.38 | ||
| 33311 |
33311-33022 |
SHAFT, INPUT | 1997/12 - 2001/12 | ST215..MTM | JPY 37,821 | USD 260.84 | ||
| 33311A |
90365-30023 |
BEARING (FOR INPUT SHAFT FRONT) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 5,961 | USD 41.11 | ||
| 33311A |
90365-30017 |
BEARING (FOR INPUT SHAFT FRONT) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 4,134 | USD 28.51 | ||
| 33311E |
90363-33007 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 3,585 | USD 24.73 | ||
| 33311E |
90363-29006 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 3,332 | USD 22.98 | ||
| 33311P |
90520-30008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.35-2.40,マーク 1 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.40-2.45,マーク 2 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.45-2.50,マーク 3 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30011 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.50-2.55,マーク 4 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30012 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.55-2.60,マーク 5 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30013 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.60-2.65,マーク 6 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30021 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.65-2.69,マーク 7 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30022 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.70-2.74,マーク 8 |
JPY 141 | USD 0.97 | ||
| 33311P | 90520-27018 | RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.15-2.20,マーク A |
DISCONTINUED | DISCONTINUED | ||
| 33311P |
90520-27019 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.20-2.25,マーク B |
JPY 295 | USD 2.04 | ||
| 33311P | 90520-27020 | RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.25-2.30,マーク C |
DISCONTINUED | DISCONTINUED | ||
| 33311P | 90520-27021 | RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.30-2.35,マーク D |
DISCONTINUED | DISCONTINUED | ||
| 33311P | 90520-27022 | RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.35-2.40,マーク E |
DISCONTINUED | DISCONTINUED | ||
| 33311X | 90521-76001 | RING, HOLE SNAP (FOR INPUT SHAFT REAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33311Y |
90520-76003 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM |
JPY 239 | USD 1.65 | ||
| 33321 |
33302-12070 |
SHAFT, OUTPUT | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 21,652 | USD 149.33 | ||
| 33321 |
33321-33030 |
SHAFT, OUTPUT | 1997/12 - 2001/12 | ST215..MTM | JPY 35,572 | USD 245.32 | ||
| 33321A |
90366-28002 |
BEARING (FOR OUTPUT SHAFT REAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 3,065 | USD 21.14 | ||
| 33321A |
90363-25056 |
BEARING (FOR OUTPUT SHAFT REAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 2,896 | USD 19.98 | ||
| 33321G |
90179-20012 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 1996/01 - 1997/12 | CT215,ST215..MTM |
JPY 323 | USD 2.23 | ||
| 33321G |
90179-18003 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 1997/12 - 2001/12 | CT211,ST215..MTM |
JPY 478 | USD 3.30 | ||
| 33321H |
90564-59001 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.30,マーク 0 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59002 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.35 マーク 1 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59003 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.40,マーク 2 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59004 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.45,マーク 3 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59005 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.50,マーク 4 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59006 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.55,マーク 5 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59007 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.60,マーク 6 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59008 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.65,マーク 7 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59009 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.70,マーク 8 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59010 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.75,マーク 9 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59011 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.80,マーク A |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59012 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.85,マーク B |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59013 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.90,マーク C |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59014 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.95,マーク D |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59015 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.00,マーク E |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59016 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.05,マーク F |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59017 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.10,マーク G |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59018 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.15,マーク H |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59019 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.20,マーク J |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59020 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.25,マーク K |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59021 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.30,マーク L |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59022 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.35,マーク M |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59023 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.40,マーク N |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59024 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.45,マーク P |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59025 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.50,マーク Q |
JPY 197 | USD 1.36 | ||
| 33321N |
90366-32016 |
BEARING (FOR OUTPUT SHAFT FRONT) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 3,754 | USD 25.89 | ||
| 33321N |
90365-32013 |
BEARING (FOR OUTPUT SHAFT FRONT) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 4,485 | USD 30.93 | ||
| 33326 |
33326-32010 |
PLATE, BEARING LOCK | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 295 | USD 2.04 | ||
| 33326A | 91611-60820 | BOLT (FOR BEARING LOCK PLATE) | 1997/12 - 2001/08 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33326A |
91611-G0820 |
BOLT (FOR BEARING LOCK PLATE) | 2001/08 - 2001/12 | CT211,ST215..MTM | JPY 197 | USD 1.36 | ||
| 33331 | 33331-12041 | GEAR, REVERSE | 1996/01 - 1997/12 | CT215,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33331 |
33331-33022 |
GEAR, REVERSE | 1997/12 - 2001/12 | ST215..MTM | JPY 14,763 | USD 101.81 | ||
| 33332 |
33332-12072 |
GEAR, 2ND | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 17,153 | USD 118.30 | ||
| 33332 |
33332-33031 |
GEAR, 2ND | 1997/12 - 2001/12 | ST215..MTM | JPY 16,872 | USD 116.36 | ||
| 33332B |
90364-44001 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 3,599 | USD 24.82 | ||
| 33332B | 90364-39013 | BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33332C |
90560-44001 |
SPACER (FOR 2ND GEAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 352 | USD 2.42 | ||
| 33333 |
33034-12071 |
GEAR, 3RD | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 15,325 | USD 105.69 | ||
| 33333 |
33034-32032 |
GEAR, 3RD | 1997/12 - 2001/12 | ST215..MTM | JPY 12,795 | USD 88.24 | ||
| 33333A |
90364-36011 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 2,700 | USD 18.62 | ||
| 33333A |
90364-33001 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 3,220 | USD 22.21 | ||
| 33334 |
33035-32061 |
GEAR, 4TH | 1996/01 - 1997/12 | ST215..MTM | JPY 17,575 | USD 121.21 | ||
| 33334 | 33035-32050 | GEAR, 4TH | 1997/12 - 2001/12 | ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33334A |
90364-36014 |
BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 2,700 | USD 18.62 | ||
| 33334A | 90364-32013 | BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33334B |
90560-36002 |
SPACER (FOR 4TH GEAR BEARING) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 112 | USD 0.78 | ||
| 33334B |
90560-32007 |
SPACER (FOR 4TH GEAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 337 | USD 2.33 | ||
| 33335 |
33335-12080 |
GEAR, 1ST | 1996/01 - 1997/12 | ST215..MTM | JPY 18,981 | USD 130.90 | ||
| 33335 |
33032-32022 |
GEAR, 1ST | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 17,575 | USD 121.21 | ||
| 33335C |
90364-45007 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 1,856 | USD 12.80 | ||
| 33335C | 90364-38004 | BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33336 |
33336-12050 |
GEAR, 5TH | 1996/01 - 1997/12 | ST215..MTM | JPY 15,044 | USD 103.75 | ||
| 33336 |
33336-33030 |
GEAR, 5TH | 1997/12 - 2001/12 | ST215..MTM | JPY 15,044 | USD 103.75 | ||
| 33336A |
90364-28013 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 1,631 | USD 11.25 | ||
| 33336A |
90364-27005 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 2,700 | USD 18.62 | ||
| 33336B |
90560-27004 |
SPACER (FOR 5TH GEAR BEARING) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 337 | USD 2.33 | ||
| 33343D |
33343-12020 |
BUSH, 2ND GEAR | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 1,350 | USD 9.31 | ||
| 33343D |
33343-33010 |
BUSH, 2ND GEAR | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 1,870 | USD 12.90 | ||
| 33343E |
90360-05012 |
BALL (FOR 2ND GEAR BUSH) | 1996/01 - 2001/12 | CT210,211,215,ST215..MTM | JPY 127 | USD 0.87 | ||
| 33348 | 33348-32010 | WASHER, 1ST GEAR THRUST | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33361 |
33361-12051 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1996/01 - 1996/03 | CT215,ST215..MTM | JPY 9,280 | USD 64.00 | ||
| 33361 |
33361-12052 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1996/03 - 1997/12 | CT215,ST215..MTM | JPY 9,280 | USD 64.00 | ||
| 33361 |
33361-33021 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1997/12 - 2001/12 | ST215..MTM | JPY 7,592 | USD 52.36 | ||
| 33362 |
33362-12030 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1996/01 - 1996/07 | CT215,ST215..MTM | JPY 8,155 | USD 56.24 | ||
| 33362 | 33362-12031 | HUB, TRANSMISSION CLUTCH, NO.2 | 1996/07 - 1997/12 | CT215,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33362 | 33362-33011 | HUB, TRANSMISSION CLUTCH, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM | DISCONTINUED | DISCONTINUED | ||
| 33362A |
90520-34003 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.30-2.35,マーク H |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.35-2.40,マーク J |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.40-2.45,マーク K |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-34006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.45-2.50,マーク L |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.50-2.55,マーク M |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.55-2.60,マーク N |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.60-2.65,マーク P |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30002 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=1.95-1.99,マーク 1 |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30003 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.00-2.04,マーク 2 |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.05-2.09,マーク 3 |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.10-2.14,マーク 4 |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.15-2.19,マーク 5 |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-30007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.20-2.24,マーク 6 |
JPY 141 | USD 0.97 | ||
| 33364 |
33364-12021 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 8,155 | USD 56.24 | ||
| 33364 |
33364-32013 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 9,280 | USD 64.00 | ||
| 33365 |
33365-12040 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 211 | USD 1.45 | ||
| 33365 |
33365-33020 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1997/12 - 2001/12 | ST215..MTM | JPY 394 | USD 2.72 | ||
| 33366 |
33366-12030 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 380 | USD 2.62 | ||
| 33366 |
33366-32020 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 380 | USD 2.62 | ||
| 33367 |
33367-12040 |
RING, SYNCHRONIZER, NO.1 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 5,062 | USD 34.91 | ||
| 33367 |
33367-33010 |
RING, SYNCHRONIZER, NO.1 | 1997/12 - 2001/12 | ST215..MTM | JPY 5,062 | USD 34.91 | ||
| 33368 |
33368-12041 |
RING, SYNCHRONIZER, NO.2 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 4,570 | USD 31.51 | ||
| 33368 |
33368-17011 |
RING, SYNCHRONIZER, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM NO.1 |
JPY 4,555 | USD 31.42 | ||
| 33368 |
33368-32020 |
RING, SYNCHRONIZER, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM NO.2 |
JPY 4,021 | USD 27.73 | ||
| 33371 |
90501-08112 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 127 | USD 0.87 | ||
| 33371 |
90501-08141 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1997/12 - 2001/12 | ST215..MTM | JPY 70 | USD 0.49 | ||
| 33391 |
90501-08131 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 197 | USD 1.36 | ||
| 33391 |
33391-32010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 155 | USD 1.07 | ||
| 33392 |
33392-12010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1996/01 - 1997/12 | CT215,ST215..MTM NO.1 |
JPY 337 | USD 2.33 | ||
| 33392 |
33392-12020 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1996/01 - 1997/12 | CT215,ST215..MTM NO.2 |
JPY 141 | USD 0.97 | ||
| 33392 | 33392-33010 | SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1997/12 - 2001/12 | CT211,ST215..MTM NO.1 |
DISCONTINUED | DISCONTINUED | ||
| 33392 |
33392-33021 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1997/12 - 2001/12 | CT211,ST215..MTM NO.2 |
JPY 253 | USD 1.75 | ||
| 33393 |
33393-12021 |
HUB, TRANSMISSION CLUTCH, NO.3 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 8,295 | USD 57.21 | ||
| 33393 |
33393-33010 |
HUB, TRANSMISSION CLUTCH, NO.3 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 8,155 | USD 56.24 | ||
| 33393A |
90520-27061 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.75-1.80,マーク A |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27062 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.80-1.85,マーク B |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27063 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.85-1.90,マーク C |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27064 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.90-1.95,マーク D |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27065 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=1.95-2.00,マーク E |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27066 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.00-2.05,マーク F |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27067 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.05-2.10,マーク G |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27068 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.10-2.15,マーク H |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-27069 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1996/01 - 1997/12 | CT215,ST215..MTM 厚さ=2.15-2.20,マーク J |
JPY 127 | USD 0.87 | ||
| 33393A |
90520-20034 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.20-2.25,マーク 13 |
JPY 267 | USD 1.84 | ||
| 33393A |
90520-20035 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.25-2.30,マーク 14 |
JPY 267 | USD 1.84 | ||
| 33393A |
90520-20036 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.30-2.35,マーク 15 |
JPY 267 | USD 1.84 | ||
| 33393A |
90520-20051 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.35-2.39,マーク 16 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20052 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.40-2.44,マーク 17 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20053 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.45-2.49,マーク 18 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20054 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.50-2.54,マーク 19 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20055 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.55-2.59,マーク 20 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20056 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.60-2.64,マーク 21 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20057 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.65-2.69,マーク 22 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20058 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.70-2.74,マーク 23 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20059 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.75-2.79,マーク 24 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20060 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.80-2.84,マーク 25 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20061 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.85-2.89,マーク 26 |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-20062 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1997/12 - 2001/12 | CT211,ST215..MTM 厚さ=2.90-2.94,マーク 27 |
JPY 225 | USD 1.55 | ||
| 33395 |
33395-12020 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 7,592 | USD 52.36 | ||
| 33395 |
33395-33010 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 9,280 | USD 64.00 | ||
| 33396A |
33396-12011 |
RING, SYNCHRONIZER PULL | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 4,626 | USD 31.90 | ||
| 33396A |
33396-33012 |
RING, SYNCHRONIZER PULL | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 4,626 | USD 31.90 | ||
| 33396B |
90520-46035 |
RING, SNAP (FOR SYNCHRONIZER PULL RING) | 1996/01 - 2001/12 | CT210,211,215,ST215..MTM | JPY 239 | USD 1.65 | ||
| 33397A |
33397-12011 |
RING, SYNCHRONIZER, INNER NO.5 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 4,021 | USD 27.73 | ||
| 33397A |
33397-33012 |
RING, SYNCHRONIZER, INNER NO.5 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 3,993 | USD 27.54 | ||
| 33398A |
33398-12010 |
RING, SYNCHRONIZER, MIDDLE NO.5 | 1996/01 - 2001/12 | CT210,211,215,ST215..MTM | JPY 3,332 | USD 22.98 | ||
| 33399D |
33399-12011 |
RING, SYNCHRONIZER, OUTER NO.5 | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 4,626 | USD 31.90 | ||
| 33399D |
33399-33010 |
RING, SYNCHRONIZER, OUTER NO.5 | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 4,626 | USD 31.90 | ||
| 33402 |
33402-12031 |
GEAR SUB-ASSY, REVERSE IDLER | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 9,842 | USD 67.88 | ||
| 33402 |
33402-33011 |
GEAR SUB-ASSY, REVERSE IDLER | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 14,763 | USD 101.81 | ||
| 33422B |
33422-32030 |
GEAR, 4TH DRIVEN | 1996/01 - 1997/12 | ST215..MTM | JPY 10,826 | USD 74.66 | ||
| 33422B |
33422-32050 |
GEAR, 4TH DRIVEN | 1997/12 - 2001/12 | ST215..MTM | JPY 8,717 | USD 60.12 | ||
| 33423A |
33423-12030 |
GEAR, 3RD DRIVEN | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 16,872 | USD 116.36 | ||
| 33423A |
33423-32030 |
GEAR, 3RD DRIVEN | 1997/12 - 2001/12 | ST215..MTM | JPY 9,280 | USD 64.00 | ||
| 33428C |
33428-12040 |
GEAR, 5TH DRIVEN | 1996/01 - 1997/12 | ST215..MTM | JPY 12,795 | USD 88.24 | ||
| 33428C |
33428-32050 |
GEAR, 5TH DRIVEN | 1997/12 - 2001/12 | ST215..MTM | JPY 11,951 | USD 82.42 | ||
| 33431C |
33431-20080 |
SPACER, OUTPUT GEAR | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 1,279 | USD 8.82 | ||
| 33431C |
33431-32020 |
SPACER, OUTPUT GEAR | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 1,462 | USD 10.08 | ||
| 33451 |
33451-12032 |
SHAFT, REVERSE IDLER GEAR | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 3,009 | USD 20.75 | ||
| 33451 |
33451-32010 |
SHAFT, REVERSE IDLER GEAR | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 4,401 | USD 30.35 | ||
| 33451H |
90105-08150 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 141 | USD 0.97 | ||
| 33451H |
90105-08041 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1997/12 - 2001/12 | CT211,ST215..MTM | JPY 295 | USD 2.04 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 1996/01 - 2001/12 | AT21#,CT210,211,215,ST215..MTM | JPY 84 | USD 0.58 | ||
| 33462 |
33462-20050 |
WASHER, REVERSE IDLER THRUST | 1996/01 - 1997/12 | CT215,ST215..MTM | JPY 309 | USD 2.13 | ||
| 33462 |
33462-12010 |
WASHER, REVERSE IDLER THRUST | 1997/12 - 2001/12 | AT21#,CT211,ST215..MTM | JPY 267 | USD 1.84 |