Select parts.
| car name | 211110 MR2 (1984/06 - 1989/12) | |
|---|---|---|
| model name | AW11-WJMQR (1986/08 - 1989/12) | |
| ENGINE 1 | 4AGZE | 1600CC DOHC EFI SUPER CHARGER |
| BODY | TBR | T-BAR ROOF |
| GRADE | G | G TYPE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| FUEL INDUCTION | SPC | SUPER CHARGER |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33125 |
33125-20010 |
RECEIVER, MANUAL TRANSAXLE CASE | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 239 | USD 1.65 | ||
| 33125A |
91611-60616 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 1986/08 - 1988/03 | AW11..5F..SPC | JPY 309 | USD 2.13 | ||
| 33125A |
91611-60616 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 1988/03 - 1989/12 | AW11..5F..SPC | JPY 309 | USD 2.13 | ||
| 33134B |
33134-20010 |
COVER, OUTPUT SHAFT(MTM) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 647 | USD 4.46 | ||
| 33151D |
33151-20020 |
RETAINER, BEARING, REAR(MTM) | 1986/08 - 1988/04 | AW11..5F..SPC | JPY 3,895 | USD 26.86 | ||
| 33151D |
33151-20021 |
RETAINER, BEARING, REAR(MTM) | 1988/04 - 1989/05 | AW11..5F..SPC | JPY 3,895 | USD 26.86 | ||
| 33151D |
33151-20030 |
RETAINER, BEARING, REAR(MTM) | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 4,091 | USD 28.22 | ||
| 33151G |
90149-80015 |
SCREW(FOR REAR BEARING RETAINER) | 1986/08 - 1988/03 | AW11..5F..SPC | JPY 225 | USD 1.55 | ||
| 33151G |
90149-80015 |
SCREW(FOR REAR BEARING RETAINER) | 1988/03 - 1989/12 | AW11..5F..SPC | JPY 225 | USD 1.55 | ||
| 33311 |
33311-17010 |
SHAFT, INPUT | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 23,480 | USD 161.93 | ||
| 33311A |
90365-30023 |
BEARING (FOR INPUT SHAFT FRONT) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 5,961 | USD 41.11 | ||
| 33311E |
90363-33005 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1986/08 - 1989/05 | AW11..5F..SPC | JPY 3,234 | USD 22.30 | ||
| 33311E |
90363-33007 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 3,585 | USD 24.73 | ||
| 33311P |
90520-30008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.35-2.40,マーク 1,T=2.45-2.50,MARK 1 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.40-2.45,マーク 2,T=2.50-2.55,MARK 2 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.45-2.50,マーク 3,T=2.55-2.60,MARK 3 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30012 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.55-2.60,マーク 5,T=2.65-2.70,MARK 5 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30013 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.60-2.65,マーク 6,T=2.70-2.75,MARK 6 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30021 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.65-2.69,マーク 7,T=2.35-2.40,MARK 7 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30022 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.70-2.74,マーク 8,T=2.40-2.45,MARK 8 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.35-2.40,マーク 1 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.40-2.45,マーク 2 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.45-2.50,マーク 3 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30011 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.50-2.55,マーク 4 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30012 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.55-2.60,マーク 5 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30013 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.60-2.65,マーク 6 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30021 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.65-2.69,マーク 7 |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-30022 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.70-2.74,マーク 8 |
JPY 141 | USD 0.97 | ||
| 33311Y |
90520-76003 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 1986/08 - 1989/12 | AW11..5F..SPC |
JPY 239 | USD 1.65 | ||
| 33321 |
33321-20110 |
SHAFT, OUTPUT | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 23,621 | USD 162.90 | ||
| 33321A |
90366-28002 |
BEARING (FOR OUTPUT SHAFT REAR) | 1986/08 - 1989/05 | AW11..5F..SPC | JPY 3,065 | USD 21.14 | ||
| 33321A |
90366-28007 |
BEARING (FOR OUTPUT SHAFT REAR) | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 3,065 | USD 21.14 | ||
| 33321G |
90179-20012 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 1986/08 - 1989/12 | AW11..5F..SPC |
JPY 323 | USD 2.23 | ||
| 33321H |
90564-59001 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.30,マーク 0,T=1.30,MARK 0 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59002 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.35 マーク 1,T=1.35,MARK 1 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59003 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.40,マーク 2,T=1.40,MARK 2 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59004 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.45,マーク 3,T=1.45,MARK 3 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59005 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.50,マーク 4,T=1.50,MARK 4 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59006 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.55,マーク 5,T=1.55,MARK 5 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59007 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.60,マーク 6,T=1.60,MARK 6 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59008 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.65,マーク 7,T=1.65,MARK 7 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59009 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.70,マーク 8,T=1.70,MARK 8 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59010 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.75,マーク 9,T=1.75,MARK 9 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59011 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.80,マーク A,T=1.80,MARK A |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59012 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.85,マーク B,T=1.85,MARK B |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59013 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.90,マーク C,T=1.90,MARK C |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59014 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=1.95,マーク D,T=1.95,MARK D |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59015 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.00,マーク E,T=2.00,MARK E |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59016 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.05,マーク F,T=2.05,MARK F |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59017 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.10,マーク G,T=2.10,MARK G |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59018 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.15,マーク H,T=2.15,MARK H |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59019 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.20,マーク J,T=2.20,MARK J |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59020 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.25,マーク K,T=2.25,MARK K |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59021 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.30,マーク L,T=2.30,MARK L |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59022 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.35,マーク M,T=2.35,MARK M |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59023 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.40,マーク N,T=2.40,MARK N |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59024 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.45,マーク P,T=2.45,MARK P |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59025 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.50,マーク Q,T=2.50,MARK Q |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59001 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.30,マーク 0 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59002 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.35 マーク 1 |
JPY 141 | USD 0.97 | ||
| 33321H |
90564-59003 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.40,マーク 2 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59004 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.45,マーク 3 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59005 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.50,マーク 4 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59006 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.55,マーク 5 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59007 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.60,マーク 6 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59008 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.65,マーク 7 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59009 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.70,マーク 8 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59010 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.75,マーク 9 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59011 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.80,マーク A |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59012 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.85,マーク B |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59013 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.90,マーク C |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59014 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=1.95,マーク D |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59015 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.00,マーク E |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59016 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.05,マーク F |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59017 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.10,マーク G |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59018 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.15,マーク H |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59019 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.20,マーク J |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59020 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.25,マーク K |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59021 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.30,マーク L |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59022 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.35,マーク M |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59023 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.40,マーク N |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59024 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.45,マーク P |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-59025 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1988/03 - 1989/05 | AW11..5F..SPC 厚さ=2.50,マーク Q |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-60001 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.40,マーク 0 |
JPY 155 | USD 1.07 | ||
| 33321H |
90564-60002 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.45,マーク 1 |
JPY 169 | USD 1.16 | ||
| 33321H |
90564-60003 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.50,マーク 2 |
JPY 169 | USD 1.16 | ||
| 33321H |
90564-60004 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.55,マーク 3 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-60005 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.60,マーク 4 |
JPY 197 | USD 1.36 | ||
| 33321H |
90564-60006 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.65,マーク 5 |
JPY 211 | USD 1.45 | ||
| 33321H |
90564-60007 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.70,マーク 6 |
JPY 211 | USD 1.45 | ||
| 33321H |
90564-60008 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.75,マーク 7 |
JPY 253 | USD 1.75 | ||
| 33321H |
90564-60009 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.80,マーク 8 |
JPY 253 | USD 1.75 | ||
| 33321H |
90564-60010 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.85,マーク 9 |
JPY 295 | USD 2.04 | ||
| 33321H |
90564-60011 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.90,マーク A |
JPY 295 | USD 2.04 | ||
| 33321H |
90564-60012 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=0.95,マーク B |
JPY 309 | USD 2.13 | ||
| 33321H |
90564-60013 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.00,マーク C |
JPY 309 | USD 2.13 | ||
| 33321H |
90564-60014 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.05,マーク D |
JPY 323 | USD 2.23 | ||
| 33321H |
90564-60015 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.10,マーク E |
JPY 323 | USD 2.23 | ||
| 33321H |
90564-60016 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.15,マーク F |
JPY 337 | USD 2.33 | ||
| 33321H |
90564-60017 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.20,マーク G |
JPY 337 | USD 2.33 | ||
| 33321H |
90564-60018 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.25,マーク H |
JPY 366 | USD 2.52 | ||
| 33321H |
90564-60019 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.30,マーク J |
JPY 366 | USD 2.52 | ||
| 33321H |
90564-60020 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.35,マーク K |
JPY 380 | USD 2.62 | ||
| 33321H |
90564-60021 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.40,マーク L |
JPY 380 | USD 2.62 | ||
| 33321H |
90564-60022 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.45,マーク M |
JPY 394 | USD 2.72 | ||
| 33321H |
90564-60023 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.50,マーク N |
JPY 394 | USD 2.72 | ||
| 33321H |
90564-60024 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.55,マーク P |
JPY 408 | USD 2.81 | ||
| 33321H |
90564-60025 |
SHIM (FOR OUTPUT SHAFT REAR BEARING) | 1989/05 - 1989/12 | AW11..5F..SPC 厚さ=1.60,マーク Q |
JPY 408 | USD 2.81 | ||
| 33321N |
90366-32002 |
BEARING (FOR OUTPUT SHAFT FRONT) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 3,754 | USD 25.89 | ||
| 33331 |
33331-20040 |
GEAR, REVERSE | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 21,231 | USD 146.42 | ||
| 33332 | 33033-17010 | GEAR, 2ND | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33332B |
90364-39006 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 2,728 | USD 18.81 | ||
| 33332C |
90560-32008 |
SPACER (FOR 2ND GEAR BEARING) | 1984/06 - 1988/03 | AW1#..5F | JPY 127 | USD 0.87 | ||
| 33332C |
90560-39003 |
SPACER (FOR 2ND GEAR BEARING) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 169 | USD 1.16 | ||
| 33333 |
33034-17010 |
GEAR, 3RD | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 24,886 | USD 171.63 | ||
| 33333A |
90364-36007 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 2,221 | USD 15.32 | ||
| 33334 |
33035-17010 |
GEAR, 4TH | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 21,231 | USD 146.42 | ||
| 33334A |
90364-36010 |
BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 2,053 | USD 14.16 | ||
| 33334B |
90560-36002 |
SPACER (FOR 4TH GEAR BEARING) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 112 | USD 0.78 | ||
| 33335 |
33032-17010 |
GEAR, 1ST | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 20,949 | USD 144.48 | ||
| 33335C |
90364-39008 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 2,896 | USD 19.98 | ||
| 33336 |
33036-20041 |
GEAR, 5TH | 1986/08 - 1989/05 | AW11..5F..SPC | JPY 21,231 | USD 146.42 | ||
| 33336 |
33036-20050 |
GEAR, 5TH | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 17,434 | USD 120.24 | ||
| 33336A |
90364-33004 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 2,559 | USD 17.65 | ||
| 33336B |
90560-33004 |
SPACER (FOR 5TH GEAR BEARING) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 183 | USD 1.26 | ||
| 33361 |
33361-20040 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 11,951 | USD 82.42 | ||
| 33361B |
90520-37004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.80-2.85,マーク A,T=2.80-2.85,MARK A |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.85-2.90,マーク B,T=2.85-2.90,MARK B |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.90-2.95,マーク C,T=2.90-2.95,MARK C |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.95-3.00,マーク D,T=2.95-3.00,MARK D |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=3.00-3.05,マーク E,T=3.00-3.05,MARK E |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=3.05-3.10,マーク F,T=3.05-3.10,MARK F |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37010 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=3.10-3.15,マーク G,T=3.10-3.15,MARK G |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.80-2.85,マーク A |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.85-2.90,マーク B |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.90-2.95,マーク C |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.95-3.00,マーク D |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=3.00-3.05,マーク E |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=3.05-3.10,マーク F |
JPY 211 | USD 1.45 | ||
| 33361B |
90520-37010 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=3.10-3.15,マーク G |
JPY 211 | USD 1.45 | ||
| 33362 |
33362-20020 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1986/08 - 1989/08 | AW11..5F..SPC | JPY 6,918 | USD 47.71 | ||
| 33362 | 33362-20021 | HUB, TRANSMISSION CLUTCH, NO.2 | 1989/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33362A |
90520-34003 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.30-2.35,マーク H,T=2.30-2.35,MARK H |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.35-2.40,マーク J,T=2.35-2.40,MARK J |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.40-2.45,マーク K,T=2.40-2.45,MARK K |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-34006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.45-2.50,マーク L,T=2.45-2.50,MARK L |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.50-2.55,マーク M,T=2.50-2.55,MARK M |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.55-2.60,マーク N,T=2.55-2.60,MARK N |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.60-2.65,マーク P,T=2.60-2.65,MARK P |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34003 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.30-2.35,マーク H |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.35-2.40,マーク J |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.40-2.45,マーク K |
JPY 169 | USD 1.16 | ||
| 33362A |
90520-34006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.45-2.50,マーク L |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.50-2.55,マーク M |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.55-2.60,マーク N |
JPY 141 | USD 0.97 | ||
| 33362A |
90520-34009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.60-2.65,マーク P |
JPY 141 | USD 0.97 | ||
| 33364 |
33364-20021 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1986/08 - 1987/09 | AW11..5F..SPC | JPY 6,172 | USD 42.57 | ||
| 33364 | 33364-20023 | SLEEVE, TRANSMISSION HUB, NO.2 | 1987/09 - 1989/08 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33364 |
33364-20024 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1989/08 - 1989/12 | AW11..5F..SPC | JPY 7,002 | USD 48.29 | ||
| 33365 | 33365-20050 | KEY, SYNCHROMESH SHIFTING, NO.1 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33366 |
33366-20021 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 380 | USD 2.62 | ||
| 33367 | 33367-20030 | RING, SYNCHRONIZER, NO.1 | 1986/08 - 1988/03 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33367 | 33367-20040 | RING, SYNCHRONIZER, NO.1 | 1988/03 - 1989/12 | AW11..5F..SPC 1ST |
DISCONTINUED | DISCONTINUED | ||
| 33367 | 33367-20050 | RING, SYNCHRONIZER, NO.1 | 1988/03 - 1989/12 | AW11..5F..SPC 2ND |
DISCONTINUED | DISCONTINUED | ||
| 33368 | 33368-20030 | RING, SYNCHRONIZER, NO.2 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33369 | 33369-20010 | RING, SYNCHRONIZER, NO.3 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33371 | 33371-20020 | SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33391 | 33391-20010 | SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33392 | 33392-20010 | SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33393 | 33393-20020 | HUB, TRANSMISSION CLUTCH, NO.3 | 1986/08 - 1989/12 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27037 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.25-2.30,マーク Q,T=2.25-2.30,MARK Q |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27038 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.30-2.35,マーク R,T=2.30-2.35,MARK R |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27039 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.35-2.40,マーク S,T=2.35-2.40,MARK S |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27040 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.40-2.45,マーク T,T=2.40-2.45,MARK T |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27041 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.45-2.50,マーク U,T=2.45-2.50,MARK U |
DISCONTINUED | DISCONTINUED | ||
| 33393A |
90520-27042 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.50-2.55,マーク V,T=2.50-2.55,MARK V |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27043 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.55-2.60,マーク W,T=2.55-2.60,MARK W |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27044 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.60-2.65,マーク X,T=2.60-2.65,MARK X |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27045 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1986/08 - 1988/03 | AW11..5F..SPC 厚さ=2.65-2.70,マーク Y,T=2.65-2.70,MARK Y |
JPY 225 | USD 1.55 | ||
| 33393A | 90520-27037 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.25-2.30,マーク Q |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27038 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.30-2.35,マーク R |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27039 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.35-2.40,マーク S |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27040 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.40-2.45,マーク T |
DISCONTINUED | DISCONTINUED | ||
| 33393A | 90520-27041 | RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.45-2.50,マーク U |
DISCONTINUED | DISCONTINUED | ||
| 33393A |
90520-27042 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.50-2.55,マーク V |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27043 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.55-2.60,マーク W |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27044 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.60-2.65,マーク X |
JPY 225 | USD 1.55 | ||
| 33393A |
90520-27045 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 1988/03 - 1989/12 | AW11..5F..SPC 厚さ=2.65-2.70,マーク Y |
JPY 225 | USD 1.55 | ||
| 33395 | 33395-20011 | SLEEVE, TRANSMISSION HUB, NO.3 | 1986/08 - 1989/05 | AW11..5F..SPC | DISCONTINUED | DISCONTINUED | ||
| 33395 |
33395-20020 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 7,733 | USD 53.33 | ||
| 33402 |
33402-20040 |
GEAR SUB-ASSY, REVERSE IDLER | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 15,888 | USD 109.57 | ||
| 33422B |
33422-17010 |
GEAR, 4TH DRIVEN | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 17,434 | USD 120.24 | ||
| 33423A |
33423-17010 |
GEAR, 3RD DRIVEN | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 19,965 | USD 137.69 | ||
| 33428C |
33428-20050 |
GEAR, 5TH DRIVEN | 1986/08 - 1989/05 | AW11..5F..SPC | JPY 11,951 | USD 82.42 | ||
| 33428C |
33428-20060 |
GEAR, 5TH DRIVEN | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 10,686 | USD 73.69 | ||
| 33431C |
33431-20080 |
SPACER, OUTPUT GEAR | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 1,279 | USD 8.82 | ||
| 33451 |
33451-20020 |
SHAFT, REVERSE IDLER GEAR | 1986/08 - 1987/10 | AW11..5F..SPC | JPY 3,079 | USD 21.24 | ||
| 33451 |
33451-20030 |
SHAFT, REVERSE IDLER GEAR | 1987/10 - 1989/05 | AW11..5F..SPC | JPY 3,023 | USD 20.85 | ||
| 33451 |
33451-20040 |
SHAFT, REVERSE IDLER GEAR | 1989/05 - 1989/12 | AW11..5F..SPC | JPY 3,009 | USD 20.75 | ||
| 33451H |
90105-08127 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1986/08 - 1989/01 | AW11..5F..SPC | JPY 253 | USD 1.75 | ||
| 33451H |
90105-08150 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 1989/01 - 1989/12 | AW11..5F..SPC | JPY 141 | USD 0.97 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 1986/08 - 1989/12 | AW11..5F..SPC | JPY 84 | USD 0.58 | ||
| 33462 |
33462-20050 |
WASHER, REVERSE IDLER THRUST | 1987/10 - 1989/12 | AW11..5F..SPC | JPY 309 | USD 2.13 |