Select parts.
| car name | 691130 HIACE TRUCK (1982/11 - 1985/07) | |
|---|---|---|
| model name | LH24-QD3 (1982/11 - 1985/07) | |
| ENGINE 1 | L | 2200CC DIESEL |
| GRADE | DLX | DLX TYPE |
| GEAR SHIFT TYPE | 5H | MTM, 5-SPEED COLUMN SHIFT |
| DECK,CAB | T1 | LOW DECK,PICKUP(STANDARD DECK 1-SIDE OPEN) |
| DECK(MATERIAL) | TS | STEEL DECK |
| SEATING CAPACITY | 03S | 3-SEATER |
| REAR TIRE | ST | ST TYPE:SINGLE TIRE |
| BUILDING CONDITION | IV | INCOMPLETE VEHICLES (CHASSIS & CAB) |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33311 |
33301-35040 |
SHAFT, INPUT | 1982/11 - 1984/01 | LH24 | JPY 37,259 | USD 256.96 | ||
| 33311 |
33301-26022 |
SHAFT, INPUT | 1984/01 - 1985/07 | LH24 | JPY 33,744 | USD 232.72 | ||
| 33311A |
90363-32019 |
BEARING (FOR INPUT SHAFT FRONT) | 1982/11 - 1984/01 | LH24 | JPY 2,868 | USD 19.78 | ||
| 33311A |
90363-32024 |
BEARING (FOR INPUT SHAFT FRONT) | 1984/01 - 1985/07 | LH24 | JPY 3,403 | USD 23.47 | ||
| 33311B |
90520-30214 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.05,マーク 0,T=2.05-2.10 |
JPY 225 | USD 1.55 | ||
| 33311B |
90520-30215 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.10,マーク 1,T=2.10-2.15 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30216 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.15,マーク 2,T=2.15-2.20 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30217 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.20,マーク 3,T=2.20-2.25 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30218 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.25,マーク 4,T=2.25-2.30 |
JPY 253 | USD 1.75 | ||
| 33311B |
90520-30219 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.30,マーク 5,T=2.30-2.35 |
JPY 253 | USD 1.75 | ||
| 33311C |
90521-33001 |
RING, HOLE SNAP (FOR NEEDLE ROLLER) | 1982/11 - 1984/01 | LH24 | JPY 436 | USD 3.01 | ||
| 33311D |
90361-06047 |
BEARING, INPUT SHAFT | 1982/11 - 1984/01 | LH24,RH24 | JPY 225 | USD 1.55 | ||
| 33311D |
90361-06002 |
BEARING, INPUT SHAFT | 1984/01 - 1985/07 | LH24 | JPY 141 | USD 0.97 | ||
| 33311G |
90520-76002 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | LH24 | JPY 478 | USD 3.30 | ||
| 33318 |
33318-30010 |
PIECE, GEAR SPLINE, NO.5 | 1982/11 - 1982/12 | LH24 | JPY 12,232 | USD 84.36 | ||
| 33318 |
33318-28010 |
PIECE, GEAR SPLINE, NO.5 | 1982/12 - 1985/07 | LH24 | JPY 13,357 | USD 92.12 | ||
| 33321 |
33321-26041 |
SHAFT, OUTPUT | 1982/11 - 1984/01 | LH24 | JPY 43,727 | USD 301.56 | ||
| 33321 |
33321-26050 |
SHAFT, OUTPUT | 1984/01 - 1985/07 | LH24 | JPY 28,964 | USD 199.75 | ||
| 33321B |
90520-25005 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.67-2.72,マーク A,T=2.67-2.72 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.73-2.78,マーク B,T=2.73-2.78 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25009 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.79-2.84,マーク C,T=2.79-2.84 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25010 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.85-2.90,マーク D,T=2.85-2.90 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25011 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.91-2.96,マーク E,T=2.91-2.96 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25012 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=2.97-3.02,マーク F,T=2.97-3.02 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25013 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=3.03-3.08,マーク G,T=3.03-3.08 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25014 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=3.09-3.14,マーク H,T=3.09-3.14 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25015 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=3.15-3.20,マーク J,T=3.15-3.20 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25016 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=3.21-3.26,マーク K,T=3.21-3.26 |
JPY 155 | USD 1.07 | ||
| 33321B |
90520-25017 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=3.27-3.32,マーク L,T=3.27-3.32 |
JPY 155 | USD 1.07 | ||
| 33321C |
90520-71221 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | LH24 厚さ=1.65,内径=71.1 |
JPY 295 | USD 2.04 | ||
| 33321D |
90520-28010 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=1.85,マーク D-1,T=1.85-1.90 |
JPY 253 | USD 1.75 | ||
| 33321D |
90520-28011 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=1.95,マーク E-1,T=1.95-2.00 |
JPY 253 | USD 1.75 | ||
| 33321D |
90520-28012 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=1.75,マーク C-1,T=1.75-1.80 |
JPY 169 | USD 1.16 | ||
| 33321D |
90520-28013 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=2.05,マーク F-1,T=2.05-2.10 |
JPY 155 | USD 1.07 | ||
| 33321D |
90520-28245 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24,RH24 厚さ=1.80-1.85,マーク D,T=1.80-1.85 |
JPY 239 | USD 1.65 | ||
| 33321D |
90520-28246 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=1.90-1.95,マーク E,T=1.90-1.95 |
JPY 239 | USD 1.65 | ||
| 33321D |
90520-28248 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24 厚さ=2.00-2.05,マーク F,T=2.00-2.05 |
JPY 183 | USD 1.26 | ||
| 33321V |
90363-30036 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1982/11 - 1984/01 | LH24 | JPY 2,868 | USD 19.78 | ||
| 33321V |
90363-30031 |
BEARING (FOR OUTPUT SHAFT CENTER) | 1984/01 - 1985/07 | LH24 | CONTACT US | CONTACT US | ||
| 33331 | 33331-35040 | GEAR, REVERSE | 1982/11 - 1984/01 | LH24 | DISCONTINUED | DISCONTINUED | ||
| 33331 |
33331-28010 |
GEAR, REVERSE | 1984/01 - 1985/07 | LH24 | JPY 17,997 | USD 124.12 | ||
| 33332 |
33033-26020 |
GEAR, 2ND | 1982/11 - 1985/07 | LH24 | JPY 18,419 | USD 127.03 | ||
| 33332B |
90364-38002 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 1982/11 - 1985/07 | LH24 | JPY 2,714 | USD 18.71 | ||
| 33333 |
33034-26020 |
GEAR, 3RD | 1982/11 - 1984/01 | LH24 | JPY 13,638 | USD 94.06 | ||
| 33333 |
33034-26040 |
GEAR, 3RD | 1984/01 - 1985/07 | LH24 | JPY 15,466 | USD 106.66 | ||
| 33333A |
90364-35005 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 1982/11 - 1985/07 | LH24 | JPY 2,981 | USD 20.56 | ||
| 33335 |
33032-26010 |
GEAR, 1ST | 1982/11 - 1985/07 | LH24 | JPY 19,825 | USD 136.72 | ||
| 33335C |
90364-39002 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1982/11 - 1985/07 | LH24 | JPY 3,782 | USD 26.08 | ||
| 33336 |
33336-30010 |
GEAR, 5TH | 1982/11 - 1984/01 | LH24 | JPY 7,171 | USD 49.45 | ||
| 33336 |
33336-28020 |
GEAR, 5TH | 1984/01 - 1985/07 | LH24 | JPY 4,288 | USD 29.57 | ||
| 33349 |
33349-30020 |
WASHER, 5TH GEAR THRUST | 1982/11 - 1985/07 | LH24 | JPY 1,476 | USD 10.18 | ||
| 33355 |
33355-35011 |
RACE, 1ST GEAR BEARING INNER | 1982/11 - 1985/07 | LH24 | JPY 4,359 | USD 30.06 | ||
| 33355A |
90360-06004 |
KEY OR BALL, 1ST GEAR BEARING INNER RACE LOCK | 1982/11 - 1985/07 | LH24 | JPY 112 | USD 0.78 | ||
| 33359A |
90360-06004 |
BALL, 5TH GEAR BEARING INNER RACE LOCK | 1982/11 - 1985/07 | LH24 | JPY 112 | USD 0.78 | ||
| 33361 |
33361-35020 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1982/11 - 1985/07 | LH24 | JPY 8,577 | USD 59.15 | ||
| 33362 |
33362-35020 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1982/11 - 1985/07 | LH24 | JPY 12,795 | USD 88.24 | ||
| 33364 |
33364-35010 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1982/11 - 1985/07 | LH24 | JPY 10,545 | USD 72.72 | ||
| 33365 |
33365-35020 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1982/11 - 1985/07 | LH24 | JPY 422 | USD 2.91 | ||
| 33366 |
33366-35020 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1982/11 - 1985/07 | LH24 | JPY 436 | USD 3.01 | ||
| 33367 |
33368-20012 |
RING, SYNCHRONIZER, NO.1 | 1982/11 - 1985/07 | LH24 | JPY 3,459 | USD 23.85 | ||
| 33368 |
33367-14010 |
RING, SYNCHRONIZER, NO.2 | 1982/11 - 1985/07 | LH24 | JPY 2,924 | USD 20.17 | ||
| 33369 |
33367-14010 |
RING, SYNCHRONIZER, NO.3 | 1982/11 - 1985/07 | LH24 | JPY 2,924 | USD 20.17 | ||
| 33371 |
33371-14031 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1982/11 - 1985/07 | LH24 | JPY 183 | USD 1.26 | ||
| 33376 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY (FOR NO.3 CLUTCH HUB) | 1982/11 - 1985/07 | LH24 |
JPY 197 | USD 1.36 | ||
| 33377 |
33394-30010 |
KEY, SYNCHROMESH SHIFTING (FOR NO.3 CLUTCH HUB) | 1982/11 - 1985/07 | LH24 |
JPY 422 | USD 2.91 | ||
| 33391 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1982/11 - 1985/07 | LH24,RH24 | JPY 197 | USD 1.36 | ||
| 33395 |
33395-14013 |
SLEEVE, TRANSMISSION HUB, NO.3 | 1982/11 - 1985/07 | LH24 | JPY 8,717 | USD 60.12 | ||
| 33402 |
33402-35030 |
GEAR SUB-ASSY, REVERSE IDLER | 1982/11 - 1984/01 | LH24 | JPY 16,028 | USD 110.54 | ||
| 33402 |
33402-28010 |
GEAR SUB-ASSY, REVERSE IDLER | 1984/01 - 1984/05 | LH24 | JPY 10,404 | USD 71.75 | ||
| 33402 |
33402-28011 |
GEAR SUB-ASSY, REVERSE IDLER | 1984/05 - 1985/07 | LH24 | JPY 12,795 | USD 88.24 | ||
| 33411A |
90365-25007 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 1982/11 - 1984/01 | LH24 | JPY 5,919 | USD 40.82 | ||
| 33411A |
90365-25010 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 1984/01 - 1985/07 | LH24 | JPY 5,287 | USD 36.46 | ||
| 33411D |
90520-49222 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 1982/11 - 1985/07 | LH24 厚さ=1.07,外径=55.6 |
JPY 267 | USD 1.84 | ||
| 33411E | 90179-20002 | NUT(FOR COUNTER GEAR SHAFT) | 1982/11 - 1985/04 | LH24 | DISCONTINUED | DISCONTINUED | ||
| 33411E |
90179-20009 |
NUT(FOR COUNTER GEAR SHAFT) | 1985/04 - 1985/07 | LH24 | JPY 436 | USD 3.01 | ||
| 33411H |
90365-18002 |
BEARING OR ROLLER(FOR COUNTER GEAR REAR) | 1982/11 - 1983/08 | LH24 | JPY 3,782 | USD 26.08 | ||
| 33411P |
90365-31002 |
BEARING, COUNTER SHAFT CENTER | 1982/11 - 1985/07 | LH24 | JPY 4,668 | USD 32.19 | ||
| 33411Q |
90520-23089 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.10-2.15,T=2.10-2.15 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23090 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.20-2.25,T=2.20-2.25 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23115 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.05-2.10,T=2.05-2.10 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23143 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.15-2.20,T=2.15-2.20 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23144 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.25-2.30,T=2.25-2.30 |
JPY 183 | USD 1.26 | ||
| 33411Q |
90520-23145 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 1982/11 - 1985/07 | LH24 厚さ=2.30-2.35,T=2.35-2.40 |
JPY 183 | USD 1.26 | ||
| 33411R |
90521-38001 |
RING, SNAP, COUNTER GEAR REAR BEARING | 1982/11 - 1983/08 | LH24 | JPY 197 | USD 1.36 | ||
| 33421 |
33421-26040 |
GEAR, COUNTER | 1982/11 - 1983/08 | LH24 | JPY 46,539 | USD 320.96 | ||
| 33421 |
33421-26041 |
GEAR, COUNTER | 1983/08 - 1984/01 | LH24 | JPY 45,695 | USD 315.14 | ||
| 33421 |
33421-26081 |
GEAR, COUNTER | 1984/01 - 1985/07 | LH24 | JPY 37,962 | USD 261.81 | ||
| 33428 |
33046-30020 |
GEAR, COUNTERSHAFT 5TH | 1982/11 - 1984/01 | LH24 | JPY 25,589 | USD 176.48 | ||
| 33428 |
33046-28020 |
GEAR, COUNTERSHAFT 5TH | 1984/01 - 1985/07 | LH24 | JPY 23,621 | USD 162.90 | ||
| 33428B |
90364-26002 |
BEARING (FOR COUNTER 5TH GEAR) | 1982/11 - 1985/07 | LH24 | JPY 3,220 | USD 22.21 | ||
| 33451 |
33451-35020 |
SHAFT, REVERSE IDLER GEAR | 1982/11 - 1984/01 | LH24 | JPY 2,461 | USD 16.97 | ||
| 33451 |
33451-28010 |
SHAFT, REVERSE IDLER GEAR | 1984/01 - 1985/07 | LH24 | JPY 3,796 | USD 26.18 | ||
| 33452 |
33452-36020 |
STOPPER, REVERSE IDLER GEAR SHAFT | 1982/11 - 1984/01 | LH24 | JPY 380 | USD 2.62 | ||
| 33452 |
33452-36030 |
STOPPER, REVERSE IDLER GEAR SHAFT | 1984/01 - 1985/07 | LH24 | JPY 197 | USD 1.36 | ||
| 33481 |
33481-20070 |
GEAR, SPEEDOMETER DRIVE (MTM) | 1982/11 - 1985/07 | LH24 歯数=5,マーク 5X17-19,W/185R14 TIRE,N=5 |
JPY 1,547 | USD 10.67 | ||
| 33481 |
33481-30040 |
GEAR, SPEEDOMETER DRIVE (MTM) | 1982/11 - 1985/07 | LH24 歯数=6,マーク 6X21-23,N=6 |
JPY 1,743 | USD 12.02 | ||
| 33481A |
90360-06004 |
KEY OR BALL, SPEEDOMETER DRIVE GEAR (MTM) | 1982/11 - 1985/07 | LH24,RH24 | JPY 112 | USD 0.78 | ||
| 33481B |
90520-26179 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | LH24 厚さ=1.50,外径=31.3 |
JPY 309 | USD 2.13 |