Select parts.
| car name | 691130 HIACE TRUCK (1982/11 - 1985/07) | |
|---|---|---|
| model name | RH24-JD3 (1982/11 - 1985/07) | |
| ENGINE 1 | 12RJ | 1600CC |
| GRADE | DLX | DLX TYPE |
| GEAR SHIFT TYPE | 4H | MTM, 4-SPEED COLUMN SHIFT |
| DECK,CAB | T1 | LOW DECK,PICKUP(STANDARD DECK 1-SIDE OPEN) |
| DECK(MATERIAL) | TS | STEEL DECK |
| SEATING CAPACITY | 03S | 3-SEATER |
| REAR TIRE | ST | ST TYPE:SINGLE TIRE |
| BUILDING CONDITION | IV | INCOMPLETE VEHICLES (CHASSIS & CAB) |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33105 |
33143-27010 |
BAFFLE SUB-ASSY, EXTENSION HOUSING OIL | 1982/11 - 1985/07 | RH24 | JPY 2,278 | USD 15.71 | ||
| 33311 |
33311-26020 |
SHAFT, INPUT | 1982/11 - 1985/07 | RH24 | JPY 34,306 | USD 236.60 | ||
| 33311A |
97163-06207 |
BEARING (FOR INPUT SHAFT FRONT) | 1982/11 - 1985/07 | RH24 | JPY 2,868 | USD 19.78 | ||
| 33311B |
90520-33107 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.30-2.35,マーク 11,T=2.30-2.35 |
JPY 155 | USD 1.07 | ||
| 33311B |
90520-33168 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.05,マーク 1,T=2.05-2.10 |
JPY 197 | USD 1.36 | ||
| 33311B |
90520-33169 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.10,マーク 2,T=2.10-2.15 |
JPY 197 | USD 1.36 | ||
| 33311B |
90520-33170 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.15,マーク 3,T=2.15-2.20 |
JPY 197 | USD 1.36 | ||
| 33311B |
90520-33171 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.20,マーク 4,T=2.20-2.25 |
JPY 197 | USD 1.36 | ||
| 33311B |
90520-33172 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=2.25,マーク 5,T=2.25-2.30 |
JPY 197 | USD 1.36 | ||
| 33311C | 90521-33006 | RING, HOLE SNAP (FOR NEEDLE ROLLER) | 1982/11 - 1985/07 | RH24 | DISCONTINUED | DISCONTINUED | ||
| 33311D |
90361-06047 |
BEARING, INPUT SHAFT | 1982/11 - 1984/01 | LH24,RH24 | JPY 225 | USD 1.55 | ||
| 33311D |
90361-06047 |
BEARING, INPUT SHAFT | 1984/01 - 1985/07 | RH24 | JPY 225 | USD 1.55 | ||
| 33321 |
33321-27021 |
SHAFT, OUTPUT | 1982/11 - 1985/07 | RH24 | JPY 25,589 | USD 176.48 | ||
| 33321A |
97183-06306 |
BEARING (FOR OUTPUT SHAFT REAR) | 1982/11 - 1985/07 | RH24 | JPY 1,842 | USD 12.70 | ||
| 33321C |
90520-68181 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=1.35,マーク 1,T=1.35-1.45 |
JPY 267 | USD 1.84 | ||
| 33321C |
90520-68182 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=1.45,マーク 2,T=1.45-1.55 |
JPY 267 | USD 1.84 | ||
| 33321C |
90520-68183 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=1.55,マーク 3,T=1.55-1.65 |
JPY 267 | USD 1.84 | ||
| 33321C |
90520-68184 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=1.65,マーク 4,T=1.65-1.75 |
JPY 267 | USD 1.84 | ||
| 33321C |
90520-68185 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT BEARING) | 1982/11 - 1985/07 | RH24 厚さ=1.75,マーク 5,T=1.75-1.85 |
JPY 267 | USD 1.84 | ||
| 33321D |
90520-28242 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | RH24 厚さ=1.50-1.55,マーク A,T=1.50-1.55 |
JPY 337 | USD 2.33 | ||
| 33321D |
90520-28243 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | RH24 厚さ=1.60-1.65,マーク B,T=1.60-1.65 |
JPY 337 | USD 2.33 | ||
| 33321D |
90520-28244 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | RH24 厚さ=1.70-1.75,マーク C,T=1.70-1.75 |
JPY 337 | USD 2.33 | ||
| 33321D |
90520-28245 |
RING, SHAFT SNAP (FOR CLUTCH HUB SET) | 1982/11 - 1985/07 | LH24,RH24 厚さ=1.80-1.85,マーク D,T=1.80-1.85 |
JPY 239 | USD 1.65 | ||
| 33331 |
33331-26010 |
GEAR, REVERSE | 1982/11 - 1985/07 | RH24 | JPY 14,201 | USD 97.94 | ||
| 33332 |
33332-26030 |
GEAR, 2ND | 1982/11 - 1985/07 | RH24 | JPY 17,575 | USD 121.21 | ||
| 33333 |
33333-26010 |
GEAR, 3RD | 1982/11 - 1985/07 | RH24 | JPY 15,888 | USD 109.57 | ||
| 33335 |
33335-26010 |
GEAR, 1ST | 1982/11 - 1985/07 | RH24 | JPY 17,997 | USD 124.12 | ||
| 33335A |
90360-06004 |
BALL, 1ST SHIFT RESTRICT | 1982/11 - 1985/07 | RH24 | JPY 112 | USD 0.78 | ||
| 33335C |
90364-37050 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 1982/11 - 1985/07 | RH24 | JPY 1,772 | USD 12.22 | ||
| 33345 |
33345-26011 |
BUSH, 1ST GEAR | 1982/11 - 1985/07 | RH24 | JPY 3,543 | USD 24.44 | ||
| 33361 |
33361-26011 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1982/11 - 1985/04 | RH24 | JPY 11,951 | USD 82.42 | ||
| 33361 |
33361-26012 |
HUB, TRANSMISSION CLUTCH, NO.1 | 1985/04 - 1985/07 | RH24 | JPY 11,951 | USD 82.42 | ||
| 33362 |
33362-28010 |
HUB, TRANSMISSION CLUTCH, NO.2 | 1982/11 - 1985/07 | RH24 | JPY 11,951 | USD 82.42 | ||
| 33364 |
33364-26010 |
SLEEVE, TRANSMISSION HUB, NO.2 | 1982/11 - 1985/07 | RH24 | JPY 8,155 | USD 56.24 | ||
| 33365 |
33365-26010 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 1982/11 - 1985/07 | RH24 | JPY 380 | USD 2.62 | ||
| 33366 |
33366-26010 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 1982/11 - 1985/07 | RH24 | JPY 380 | USD 2.62 | ||
| 33367 |
33367-26022 |
RING, SYNCHRONIZER, NO.1 | 1982/11 - 1983/12 | RH24 | JPY 4,443 | USD 30.64 | ||
| 33367 |
33367-26023 |
RING, SYNCHRONIZER, NO.1 | 1983/12 - 1985/07 | RH24 | JPY 4,401 | USD 30.35 | ||
| 33368 |
33367-26022 |
RING, SYNCHRONIZER, NO.2 | 1982/11 - 1983/12 | RH24 | JPY 4,443 | USD 30.64 | ||
| 33368 |
33367-26023 |
RING, SYNCHRONIZER, NO.2 | 1983/12 - 1985/07 | RH24 | JPY 4,401 | USD 30.35 | ||
| 33371 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 1982/11 - 1985/07 | RH24 | JPY 197 | USD 1.36 | ||
| 33391 |
33371-14010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 1982/11 - 1985/07 | LH24,RH24 | JPY 197 | USD 1.36 | ||
| 33402 |
33402-26010 |
GEAR SUB-ASSY, REVERSE IDLER | 1982/11 - 1985/07 | RH24 | JPY 12,654 | USD 87.27 | ||
| 33411 |
33411-30021 |
COUNTERSHAFT | 1982/11 - 1985/07 | RH24 | JPY 2,643 | USD 18.23 | ||
| 33411A |
90364-19068 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 1982/11 - 1985/07 | RH24 | JPY 1,350 | USD 9.31 | ||
| 33411B | 90560-19450 | SPACER(FOR COUNTER GEAR BEARING) | 1982/11 - 1985/07 | RH24 | DISCONTINUED | DISCONTINUED | ||
| 33411C |
90280-03005 |
KEY, WOODRUFF(FOR COUNTER GEAR SHAFT) | 1982/11 - 1985/07 | RH24 | JPY 141 | USD 0.97 | ||
| 33411H |
90364-19068 |
BEARING OR ROLLER(FOR COUNTER GEAR REAR) | 1982/11 - 1985/07 | RH24 | JPY 1,350 | USD 9.31 | ||
| 33421 |
33421-26021 |
GEAR, COUNTER | 1982/11 - 1985/07 | RH24 | JPY 34,588 | USD 238.54 | ||
| 33441 |
33441-26012 |
WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.25,T=2.20-2.30,RR SIDE |
JPY 1,139 | USD 7.85 | ||
| 33441 | 33441-26022 | WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.35,T=2.30-2.40,RR SIDE |
DISCONTINUED | DISCONTINUED | ||
| 33441 | 33441-26032 | WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.45,T=2.40-2.50,RR SIDE |
DISCONTINUED | DISCONTINUED | ||
| 33441 | 33441-26042 | WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.55,T=2.50-2.60, RR SIDE |
DISCONTINUED | DISCONTINUED | ||
| 33441 |
33441-26052 |
WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.65,T=2.60-2.70,RR SIDE |
JPY 1,209 | USD 8.34 | ||
| 33441 |
33441-26061 |
WASHER, COUNTER GEAR SIDE THRUST, NO.1 | 1982/11 - 1985/07 | RH24 厚さ=2.21,FR SIDE |
JPY 1,547 | USD 10.67 | ||
| 33451 |
33451-30020 |
SHAFT, REVERSE IDLER GEAR | 1982/11 - 1985/07 | RH24 | JPY 1,940 | USD 13.38 | ||
| 33451A |
90280-03005 |
KEY, WOODRUFF (FOR REVERSE IDLER GEAR SHAFT) | 1982/11 - 1985/07 | RH24 | JPY 141 | USD 0.97 | ||
| 33481 |
33481-25020 |
GEAR, SPEEDOMETER DRIVE (MTM) | 1982/11 - 1985/07 | RH24 歯数=5,マーク 5X17-19 |
JPY 2,981 | USD 20.56 | ||
| 33481A |
90360-06004 |
KEY OR BALL, SPEEDOMETER DRIVE GEAR (MTM) | 1982/11 - 1985/07 | LH24,RH24 | JPY 112 | USD 0.78 | ||
| 33481B |
90520-28137 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=2.20-2.25,マーク 1,T=2.20-2.25 |
JPY 323 | USD 2.23 | ||
| 33481B |
90520-28242 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=1.50-1.55,マーク A,T=1.50-1.55 |
JPY 337 | USD 2.33 | ||
| 33481B |
90520-28243 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=1.60-1.65,マーク B,T=1.60-1.65 |
JPY 337 | USD 2.33 | ||
| 33481B |
90520-28244 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=1.70-1.75,マーク C,T=1.70-1.75 |
JPY 337 | USD 2.33 | ||
| 33481B |
90520-28245 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=1.80-1.85,マーク D,T=1.80-1.85 |
JPY 239 | USD 1.65 | ||
| 33481B |
90520-28246 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=1.90-1.95,マーク E,T=1.90-1.95 |
JPY 239 | USD 1.65 | ||
| 33481B |
90520-28248 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=2.00-2.05,マーク F,T=2.00-2.05 |
JPY 183 | USD 1.26 | ||
| 33481B |
90520-28249 |
RING OR SPACER (FOR MTM SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 厚さ=2.10-2.15,マーク G,T=2.10-2.15 |
JPY 267 | USD 1.84 | ||
| 33481D |
90560-30355 |
SPACER (FOR SPEEDOMETER DRIVE GEAR) | 1982/11 - 1985/07 | RH24 | JPY 422 | USD 2.91 |