Select parts.
| car name | 753110 DYNA/TOYOACE HV (2003/10 - 2011/06) | |
|---|---|---|
| model name | XKU304H-TPMMW3 (2003/10 - 2006/10) | |
| ENGINE 1 | N04C | 4000CC DIESEL |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 5F | MTM, 5-SPEED FLOOR SHIFT |
| CAB | SCB | SINGLE CAB |
| DECK | T5 | HIGH DECK |
| LOADING CAPACITY | 20T | 2 TONS |
| REAR TIRE | WT | DOUBLE TIRE |
| FUEL INDUCTION | DCRL | DIESEL COMMON RAIL INJECTION SYSTEM(LOWEST-POLLUTION ENGINE) |
| INCOMPLETE VEHICLES | IV3 | INCOMPLETE VEHICLES (CAB & CHASSIS) |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33037B |
33037-37030 |
RING SET, SYNCHRONIZER, NO.1 | 2003/10 - 2006/10 | XKU304,344 | JPY 7,452 | USD 51.39 | ||
| 33038E |
33037-37022 |
RING SET, SYNCHRONIZER, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 8,155 | USD 56.24 | ||
| 33039 |
33038-37012 |
RING SET, SYNCHRONIZER, NO.3 | 2003/10 - 2006/10 | XKU304,344 | JPY 16,310 | USD 112.48 | ||
| 33147 |
33147-37011 |
RETAINER, BEARING, CENTER | 2003/10 - 2006/10 | XKU304,344 | JPY 2,264 | USD 15.61 | ||
| 33311 |
33301-37220 |
SHAFT, INPUT | 2003/10 - 2006/10 | XKU304,344 | JPY 40,071 | USD 276.35 | ||
| 33311A |
90363-50007 |
BEARING (FOR INPUT SHAFT FRONT) | 2003/10 - 2006/10 | XKU304,344 | JPY 6,425 | USD 44.31 | ||
| 33311B |
90520-99010 |
RING, SHAFT SNAP (FOR FRONT BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.36-2.46 |
JPY 239 | USD 1.65 | ||
| 33311C |
96151-04500 |
RING, HOLE SNAP (FOR NEEDLE ROLLER) | 2003/10 - 2006/10 | XKU304,344 | JPY 169 | USD 1.16 | ||
| 33311D |
90361-09002 |
BEARING, INPUT SHAFT | 2003/10 - 2006/10 | XKU304,344 | JPY 239 | USD 1.65 | ||
| 33311F |
90560-38004 |
SPACER (FOR INPUT SHAFT) | 2003/10 - 2006/10 | XKU304,344 | JPY 183 | USD 1.26 | ||
| 33311P |
90520-45003 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.50-2.55,マーク A |
JPY 169 | USD 1.16 | ||
| 33311P |
90520-45004 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.55-2.60,マーク B |
JPY 169 | USD 1.16 | ||
| 33311P |
90520-45005 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.60-2.65,マーク C |
JPY 169 | USD 1.16 | ||
| 33311P |
90520-45006 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.65-2.70,マーク D |
JPY 169 | USD 1.16 | ||
| 33311P |
90520-45007 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.70-2.75,マーク E |
JPY 169 | USD 1.16 | ||
| 33311P |
90520-45008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.75-2.80,マーク F |
JPY 169 | USD 1.16 | ||
| 33321 |
33321-37060 |
SHAFT, OUTPUT | 2003/10 - 2006/10 | XKU304,344 | JPY 19,122 | USD 131.87 | ||
| 33321A |
90363-38007 |
BEARING (FOR OUTPUT SHAFT REAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 4,921 | USD 33.94 | ||
| 33321G |
90179-24008 |
NUT (FOR MANUAL TRANSMISSION OUTPUT SHAFT REARSET) | 2003/10 - 2006/10 | XKU304,344 |
JPY 281 | USD 1.94 | ||
| 33321K |
90301-31003 |
RING, O(FOR MANUAL TRANSMISSON OUTPUT SHAFT REAR SET NUT) | 2003/10 - 2006/10 | XKU304,344 |
JPY 267 | USD 1.84 | ||
| 33321M |
90520-99009 |
RING, SHAFT SNAP (FOR BEARING) | 2003/10 - 2006/10 | XKU304,344 内径=106.1,外径=115.64 |
JPY 239 | USD 1.65 | ||
| 33321V |
90363-45019 |
BEARING (FOR OUTPUT SHAFT CENTER) | 2003/10 - 2006/10 | XKU304,344 | JPY 6,032 | USD 41.60 | ||
| 33321X |
90520-41006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.40-2.45,マーク A |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41007 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.45-2.50,マーク B |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41008 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.50-2.55,マーク C |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41009 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.55-2.60,マーク D |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41010 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.60,マーク E |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41011 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.65,マーク F |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41012 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.70,マーク G |
JPY 169 | USD 1.16 | ||
| 33321X |
90520-41013 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT CENTER BEARING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.75,マーク H |
JPY 169 | USD 1.16 | ||
| 33331 |
33331-37050 |
GEAR, REVERSE | 2003/10 - 2006/10 | XKU304,344 | JPY 14,341 | USD 98.91 | ||
| 33331A |
90364-47008 |
BEARING (FOR REVERSE GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 2,503 | USD 17.26 | ||
| 33332 |
33033-37030 |
GEAR, 2ND | 2003/10 - 2006/10 | XKU304,344 | JPY 18,981 | USD 130.90 | ||
| 33332B |
90364-50003 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 2,503 | USD 17.26 | ||
| 33333 |
33034-37050 |
GEAR, 3RD | 2003/10 - 2006/10 | XKU304,344 | JPY 15,466 | USD 106.66 | ||
| 33333A |
90364-58007 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 2,953 | USD 20.36 | ||
| 33335 |
33335-37080 |
GEAR, 1ST | 2003/10 - 2006/10 | XKU304,344 | JPY 18,559 | USD 127.99 | ||
| 33335C |
90364-44004 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 2,376 | USD 16.39 | ||
| 33336 |
33036-37050 |
GEAR, 5TH | 2003/10 - 2006/10 | XKU304,344 | JPY 12,092 | USD 83.39 | ||
| 33336A |
90364-38020 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 1,982 | USD 13.67 | ||
| 33354A |
33354-37010 |
RACE, REVERSE GEAR BEARING, INNER | 2003/10 - 2006/10 | XKU304,344 | JPY 1,870 | USD 12.90 | ||
| 33361 |
33361-37030 |
HUB, TRANSMISSION CLUTCH, NO.1 | 2003/10 - 2006/10 | XKU304,344 | JPY 6,749 | USD 46.54 | ||
| 33361B |
90520-46004 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.90-2.95,マーク A |
JPY 169 | USD 1.16 | ||
| 33361B |
90520-46005 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.95-3.00,マーク B |
JPY 169 | USD 1.16 | ||
| 33361B |
90520-46006 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=3.00-3.05,マーク C |
JPY 169 | USD 1.16 | ||
| 33361B |
90520-46007 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=3.05-3.10,マーク D |
JPY 169 | USD 1.16 | ||
| 33361B |
90520-46008 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=3.10-3.15,マーク E |
JPY 169 | USD 1.16 | ||
| 33361B |
90520-46009 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2003/10 - 2006/10 | XKU304,344 厚さ=3.15-3.20,マーク F |
JPY 169 | USD 1.16 | ||
| 33362 |
33361-37040 |
HUB, TRANSMISSION CLUTCH, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 6,932 | USD 47.80 | ||
| 33362A |
90520-28054 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=1.90-1.95,マーク 4 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-28055 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=1.95-2.00,マーク 5 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-28056 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.00-2.05,マーク 6 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-28057 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.05-2.10,マーク 7 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-28058 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.10-2.15,マーク 8 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-28059 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2003/10 - 2006/10 | XKU304,344 厚さ=2.15-2.20,マーク 9 |
JPY 127 | USD 0.87 | ||
| 33363 |
33363-37040 |
SLEEVE, TRANSMISSION HUB, NO.1 | 2003/10 - 2006/10 | XKU304,344 | JPY 7,452 | USD 51.39 | ||
| 33364 |
33364-37031 |
SLEEVE, TRANSMISSION HUB, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 7,452 | USD 51.39 | ||
| 33365 |
33365-37030 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 2003/10 - 2006/10 | XKU304,344 | JPY 267 | USD 1.84 | ||
| 33366 |
33365-60010 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 169 | USD 1.16 | ||
| 33368 |
33368-60022 |
RING, SYNCHRONIZER, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 5,104 | USD 35.20 | ||
| 33368J |
33368-60043 |
RING, SYNCHRONIZER (FOR 5TH GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 4,246 | USD 29.28 | ||
| 33371 |
33371-37030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 2003/10 - 2006/10 | XKU304,344 | JPY 295 | USD 2.04 | ||
| 33391 |
33371-60010 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 2003/10 - 2006/10 | XKU304,344 | JPY 253 | USD 1.75 | ||
| 33392 |
33371-37030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 2003/10 - 2006/10 | XKU304,344 | JPY 295 | USD 2.04 | ||
| 33393 |
33393-37020 |
HUB, TRANSMISSION CLUTCH, NO.3 | 2003/10 - 2006/10 | XKU304,344 | JPY 6,749 | USD 46.54 | ||
| 33394B |
33394-37010 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 2003/10 - 2006/10 | XKU304,344 | JPY 281 | USD 1.94 | ||
| 33395 |
33395-37020 |
SLEEVE, TRANSMISSION HUB, NO.3 | 2003/10 - 2006/10 | XKU304,344 | JPY 7,452 | USD 51.39 | ||
| 33402A |
90364-28010 |
BUSH OR BEARING (FOR REVERSE IDLER GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 2,685 | USD 18.52 | ||
| 33411A |
90365-30030 |
BEARING OR ROLLER(FOR COUNTER GEAR FRONT) | 2003/10 - 2006/10 | XKU304,344 | JPY 9,139 | USD 63.03 | ||
| 33411D |
90520-27053 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.45-2.50,マーク A |
JPY 127 | USD 0.87 | ||
| 33411D |
90520-27054 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.50-2.55,マーク B |
JPY 127 | USD 0.87 | ||
| 33411D |
90520-27055 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.55-2.60,マーク C |
JPY 127 | USD 0.87 | ||
| 33411D |
90520-27056 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.60-2.65,マーク D |
JPY 127 | USD 0.87 | ||
| 33411D |
90520-27057 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.65-2.70,マーク E |
JPY 127 | USD 0.87 | ||
| 33411D |
90520-27058 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.1 | 2003/10 - 2006/10 | XKU304,344 厚さ=2.70-2.75,マーク F |
JPY 127 | USD 0.87 | ||
| 33411P |
90365-36004 |
BEARING, COUNTER SHAFT CENTER | 2003/10 - 2006/10 | XKU304,344 | JPY 5,905 | USD 40.73 | ||
| 33411Q |
90520-63001 |
RING, COUNTER GEAR FRONT BEARING SNAP, NO.2 | 2003/10 - 2006/10 | XKU304,344 厚さ=1.60-1.70 |
JPY 169 | USD 1.16 | ||
| 33411R |
90520-29032 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.40-2.45,マーク A |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29033 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.45-2.50,マーク B |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29034 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.50-2.55,マーク C |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29035 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.55-2.60,マーク D |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29036 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.60-2.65,マーク E |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29037 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.65-2.70,マーク F |
JPY 112 | USD 0.78 | ||
| 33411R |
90520-29038 |
RING, SNAP, COUNTER GEAR REAR BEARING | 2003/10 - 2006/10 | XKU304,344 厚さ=2.70-2.75,マーク G |
JPY 112 | USD 0.78 | ||
| 33411X |
90363-32038 |
BEARING, RADIAL BALL | 2003/10 - 2006/10 | XKU304,344 | JPY 3,937 | USD 27.15 | ||
| 33421 |
33421-37120 |
GEAR, COUNTER | 2003/10 - 2006/10 | XKU304,344 | JPY 37,540 | USD 258.90 | ||
| 33451 |
33451-37020 |
SHAFT, REVERSE IDLER GEAR | 2003/10 - 2006/10 | XKU304,344 | JPY 1,364 | USD 9.41 | ||
| 33451A |
90280-03002 |
KEY, WOODRUFF (FOR REVERSE IDLER GEAR SHAFT) | 2003/10 - 2006/10 | XKU304,344 | JPY 112 | USD 0.78 | ||
| 33461 |
33461-37030 |
GEAR, REVERSE IDLER | 2003/10 - 2006/10 | XKU304,344 | JPY 11,529 | USD 79.51 | ||
| 33462 |
33462-60020 |
WASHER, REVERSE IDLER THRUST | 2003/10 - 2006/10 | XKU304,344 | JPY 647 | USD 4.46 | ||
| 33481 |
33481-36150 |
GEAR, SPEEDOMETER DRIVE (MTM) | 2003/10 - 2006/10 | XKU304 歯数=6,マーク 6X20-22 |
JPY 1,772 | USD 12.22 | ||
| 33481 |
33481-37020 |
GEAR, SPEEDOMETER DRIVE (MTM) | 2003/10 - 2006/10 | XKU304,344 歯数=7,マーク 7X20-22 |
JPY 1,954 | USD 13.48 | ||
| 33481A |
90360-06004 |
KEY OR BALL, SPEEDOMETER DRIVE GEAR (MTM) | 2003/10 - 2006/10 | XKU304,344 | JPY 112 | USD 0.78 | ||
| 33481D |
33487-37020 |
SPACER (FOR SPEEDOMETER DRIVE GEAR) | 2003/10 - 2006/10 | XKU304,344 | JPY 1,083 | USD 7.47 | ||
| 36155B |
36155-36020 |
RING, TRANSFER OIL SEAL | 2003/10 - 2006/10 | XKU304,344 | JPY 914 | USD 6.30 |