Select parts.
| car name | 211130 MR-S (1999/10 - 2007/07) | |
|---|---|---|
| model name | ZZW30-AKLQH (2002/08 - 2007/07) | |
| ENGINE 1 | 1ZZFE | 1800CC 16-VALVE DOHC EFI |
| BODY | CVT | CONVERTIBLE |
| ATM,MTM | MTM | MANUAL TRANSMISSION |
| GEAR SHIFT TYPE | 6FS | MTM, 6-SPEED FLOOR SHIFT(SEQUENTIAL) |
| FUEL INDUCTION | HTWC | HIGH EFFICIENCY TWIN CAM |
Select image size.
Enter the parts code or parts number
| Parts Code | Parts Number | Parts Name | Start - End | Note | PRICE/1 QTY(JPY) | PRICE/1 QTY(USD) | Images | OEM / Aftermarket |
|---|---|---|---|---|---|---|---|---|
| 33038E |
33038-17010 |
RING SET, SYNCHRONIZER, NO.2 | 2002/08 - | ZZW30..6FS | JPY 5,483 | USD 37.82 | ||
| 33111R |
90520-57002 |
RING, HOLE SNAP(FOR OUTPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 | JPY 239 | USD 1.65 | ||
| 33125 |
33125-12011 |
RECEIVER, MANUAL TRANSAXLE CASE | 2002/08 - | ZZW30 | JPY 211 | USD 1.45 | ||
| 33125A |
91611-B0812 |
BOLT(FOR TRANSAXLE CASE RECEIVER) | 2002/08 - | ZZW30 | JPY 84 | USD 0.58 | ||
| 33134B |
33134-12022 |
COVER, OUTPUT SHAFT(MTM) | 2002/08 - | ZZW30 | JPY 295 | USD 2.04 | ||
| 33151D |
33151-52010 |
RETAINER, BEARING, REAR(MTM) | 2002/08 - | ZZW30 | JPY 3,149 | USD 21.72 | ||
| 33151E |
90119-08944 |
BOLT(FOR REAR BEARING RETAINER) | 2002/08 - | ZZW30 | JPY 112 | USD 0.78 | ||
| 33311 |
33311-20201 |
SHAFT, INPUT | 2002/08 - | ZZW30 | JPY 31,494 | USD 217.20 | ||
| 33311A |
90365-25021 |
BEARING (FOR INPUT SHAFT FRONT) | 2002/08 - | ZZW30 | JPY 2,053 | USD 14.16 | ||
| 33311D |
90363-25074 |
BEARING, INPUT SHAFT | 2002/08 - | ZZW30 | JPY 3,613 | USD 24.92 | ||
| 33311E |
90363-18013 |
BEARING, RADIAL BALL (FOR INPUT SHAFT REAR) | 2002/08 - | ZZW30 | JPY 2,700 | USD 18.62 | ||
| 33311P |
90520-22006 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.29-2.34,マーク A |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22007 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.35-2.40,マーク B |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22008 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.41-2.46,マーク C |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22009 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.47-2.52,マーク D |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22010 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.53-2.58,マーク E |
JPY 141 | USD 0.97 | ||
| 33311P |
90520-22011 |
RING, SHAFT SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 厚さ=2.59-2.64,マーク F |
JPY 141 | USD 0.97 | ||
| 33311T |
90520-17006 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.70,マーク A |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17007 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.75,マーク B |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17008 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.80,マーク C |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17009 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.85,マーク D |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17010 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.90,マーク E |
JPY 84 | USD 0.58 | ||
| 33311T |
90520-17011 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=1.95,マーク F |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17012 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.00,マーク G |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17013 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.05,マーク H |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17014 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.10,マーク J |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17015 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.15,マーク K |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17016 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.20,マーク L |
JPY 70 | USD 0.49 | ||
| 33311T |
90520-17017 |
RING, SHAFT SNAP (FOR INPUT SHAFT) | 2002/08 - | ZZW30 厚さ=2.25,マーク M |
JPY 70 | USD 0.49 | ||
| 33311X |
90520-64002 |
RING, HOLE SNAP (FOR INPUT SHAFT REAR BEARING) | 2002/08 - | ZZW30 | JPY 239 | USD 1.65 | ||
| 33321 |
33321-20140 |
SHAFT, OUTPUT | 2002/08 - | ZZW30 | JPY 23,340 | USD 160.96 | ||
| 33321A |
90363-21001 |
BEARING (FOR OUTPUT SHAFT REAR) | 2002/08 - | ZZW30 | JPY 2,700 | USD 18.62 | ||
| 33321N |
90365-33006 |
BEARING (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 | JPY 4,640 | USD 32.00 | ||
| 33321V |
90363-25067 |
BEARING (FOR OUTPUT SHAFT CENTER) | 2002/08 - | ZZW30 | JPY 3,051 | USD 21.04 | ||
| 33321Y |
90520-30002 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=1.95-1.99,マーク 1 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30003 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=2.00-2.04,マーク 2 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30004 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=2.05-2.09,マーク 3 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30005 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=2.10-2.14,マーク 4 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=2.15-2.19,マーク 5 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30007 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=2.20-2.24,マーク 6 |
JPY 141 | USD 0.97 | ||
| 33321Y |
90520-30032 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=1.85-1.89,マーク 7 |
JPY 98 | USD 0.68 | ||
| 33321Y |
90520-30033 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT BEARING) | 2002/08 - | ZZW30 厚さ=1.90-1.94,マーク 8 |
JPY 98 | USD 0.68 | ||
| 33321Z |
90520-18003 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.31-2.36,マーク B |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18004 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.37-2.42,マーク C |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18006 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.43-2.48,マーク D |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18007 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.49-2.54,マーク E |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18008 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.55-2.60,マーク F |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18009 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.61-2.66,マーク G |
JPY 112 | USD 0.78 | ||
| 33321Z |
90520-18011 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.73―2.78,マーク J |
JPY 56 | USD 0.39 | ||
| 33321Z |
90520-18013 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.67―2.72,マーク H |
JPY 56 | USD 0.39 | ||
| 33321Z |
90520-18014 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.79―2.84,マーク K |
JPY 56 | USD 0.39 | ||
| 33321Z |
90520-18015 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.85―2.90,マーク L |
JPY 56 | USD 0.39 | ||
| 33321Z |
90520-18016 |
RING, SHAFT SNAP (FOR OUTPUT SHAFT FRONT) | 2002/08 - | ZZW30 厚さ=2.91―2.96,マーク M |
JPY 56 | USD 0.39 | ||
| 33326 |
33326-12010 |
PLATE, BEARING LOCK | 2002/08 - | ZZW30 | JPY 323 | USD 2.23 | ||
| 33326A |
91611-B0812 |
BOLT (FOR BEARING LOCK PLATE) | 2002/08 - | ZZW30 | JPY 84 | USD 0.58 | ||
| 33331 |
33331-12060 |
GEAR, REVERSE | 2002/08 - | ZZW30 | JPY 16,731 | USD 115.39 | ||
| 33332 |
33332-20120 |
GEAR, 2ND | 2002/08 - 2007/06 | ZZW30 | JPY 14,763 | USD 101.81 | ||
| 33332 |
33332-12140 |
GEAR, 2ND | 2007/06 - | ZZW30 | JPY 14,763 | USD 101.81 | ||
| 33332B |
90364-32014 |
BEARING, NEEDLE ROLLER (FOR 2ND GEAR) | 2002/08 - | ZZW30 | JPY 2,348 | USD 16.19 | ||
| 33332C |
90560-32008 |
SPACER (FOR 2ND GEAR BEARING) | 2002/08 - | ZZW30 | JPY 127 | USD 0.87 | ||
| 33333 |
33034-12130 |
GEAR, 3RD | 2002/08 - 2003/01 | ZZW30 | JPY 15,325 | USD 105.69 | ||
| 33333 |
33034-12131 |
GEAR, 3RD | 2003/01 - 2007/06 | ZZW30 FROM T/M NO.30101388 |
JPY 15,044 | USD 103.75 | ||
| 33333 |
33034-12160 |
GEAR, 3RD | 2007/06 - | ZZW30 | JPY 9,420 | USD 64.97 | ||
| 33333A |
90364-31002 |
BEARING, NEEDLE ROLLER (FOR 3RD GEAR) | 2002/08 - | ZZW30 | JPY 2,151 | USD 14.84 | ||
| 33334 |
33035-20170 |
GEAR, 4TH | 2002/08 - 2003/01 | ZZW30 | JPY 15,325 | USD 105.69 | ||
| 33334 |
33035-20171 |
GEAR, 4TH | 2003/01 - 2007/06 | ZZW30 | JPY 15,044 | USD 103.75 | ||
| 33334 |
33035-52060 |
GEAR, 4TH | 2007/06 - | ZZW30 | JPY 12,513 | USD 86.30 | ||
| 33334A |
90364-29002 |
BEARING, NEEDLE ROLLER (FOR 4TH GEAR) | 2002/08 - | ZZW30 | JPY 1,701 | USD 11.73 | ||
| 33334B |
90560-29001 |
SPACER (FOR 4TH GEAR BEARING) | 2002/08 - | ZZW30 | JPY 98 | USD 0.68 | ||
| 33335 |
33032-12070 |
GEAR, 1ST | 2002/08 - 2007/06 | ZZW30 | JPY 19,965 | USD 137.69 | ||
| 33335 |
33032-12100 |
GEAR, 1ST | 2007/06 - | ZZW30 | JPY 16,591 | USD 114.42 | ||
| 33335C |
90364-38007 |
BEARING, NEEDLE ROLLER(FOR 1ST GEAR) | 2002/08 - | ZZW30 | JPY 2,700 | USD 18.62 | ||
| 33336 |
33036-20070 |
GEAR, 5TH | 2002/08 - 2007/06 | ZZW30 | JPY 17,575 | USD 121.21 | ||
| 33336 |
33036-12130 |
GEAR, 5TH | 2007/06 - | ZZW30 | JPY 10,967 | USD 75.63 | ||
| 33336A |
90364-24010 |
BEARING, NEEDLE ROLLER (FOR 5TH GEAR) | 2002/08 - | ZZW30 | JPY 1,940 | USD 13.38 | ||
| 33336B |
90560-24007 |
SPACER (FOR 5TH GEAR BEARING) | 2002/08 - | ZZW30 | JPY 70 | USD 0.49 | ||
| 33337 |
33037-20010 |
GEAR SUB-ASSY, 6TH | 2002/08 - | ZZW30 | JPY 14,763 | USD 101.81 | ||
| 33337A |
90364-22008 |
BEARING, NEEDLE ROLLER (FOR 6TH GEAR) | 2002/08 - | ZZW30 | JPY 1,772 | USD 12.22 | ||
| 33337B |
90560-22002 |
SPACER (FOR 6TH GEAR) | 2002/08 - | ZZW30 | JPY 70 | USD 0.49 | ||
| 33348 |
33348-12010 |
WASHER, 1ST GEAR THRUST | 2002/08 - | ZZW30 | JPY 506 | USD 3.49 | ||
| 33348A |
90360-05012 |
PIN OR BALL (FOR 1ST GEAR THRUST WASHER) | 2002/08 - | ZZW30 | JPY 127 | USD 0.87 | ||
| 33361 |
33361-52030 |
HUB, TRANSMISSION CLUTCH, NO.1 | 2002/08 - | ZZW30 | JPY 8,155 | USD 56.24 | ||
| 33361B |
90520-29018 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.50-2.55,マーク A |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29019 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.56-2.61,マーク B |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29020 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.62-2.67,マーク C |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29021 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.68-2.73,マーク D |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29022 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.74-2.79,マーク E |
JPY 141 | USD 0.97 | ||
| 33361B |
90520-29023 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.1) | 2002/08 - | ZZW30 厚さ=2.80-2.85,マーク F |
JPY 141 | USD 0.97 | ||
| 33362 |
33362-12040 |
HUB, TRANSMISSION CLUTCH, NO.2 | 2002/08 - | ZZW30 | JPY 7,030 | USD 48.48 | ||
| 33362A |
90520-27046 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.30-2.35,マーク 0 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27047 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.36-2.41,マーク 1 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27048 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.42-2.47,マーク 2 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27049 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.48-2.53,マーク 3 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27050 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.54-2.59,マーク 4 |
JPY 127 | USD 0.87 | ||
| 33362A |
90520-27051 |
RING, SHAFT SNAP (FOR CLUTCH HUB NO.2 SETTING) | 2002/08 - | ZZW30 厚さ=2.60-2.65,マーク 5 |
JPY 127 | USD 0.87 | ||
| 33364 |
33364-20051 |
SLEEVE, TRANSMISSION HUB, NO.2 | 2002/08 - 2003/01 | ZZW30 | JPY 8,717 | USD 60.12 | ||
| 33364 |
33364-12050 |
SLEEVE, TRANSMISSION HUB, NO.2 | 2003/01 - 2007/07 | ZZW30 | JPY 8,858 | USD 61.09 | ||
| 33365 |
33365-12051 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 2002/08 - 2006/01 | ZZW30 | JPY 309 | USD 2.13 | ||
| 33365 |
33365-52030 |
KEY, SYNCHROMESH SHIFTING, NO.1 | 2006/02 - | ZZW30 | JPY 183 | USD 1.26 | ||
| 33366 |
33366-12041 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 2002/08 - 2006/01 | ZZW30 | JPY 337 | USD 2.33 | ||
| 33366 |
33366-52030 |
KEY, SYNCHROMESH SHIFTING, NO.2 | 2006/02 - | ZZW30 | JPY 183 | USD 1.26 | ||
| 33367 |
33367-20070 |
RING, SYNCHRONIZER, NO.1 | 2002/08 - | ZZW30 | JPY 3,149 | USD 21.72 | ||
| 33368G |
33368-20061 |
RING, SYNCHRONIZER (FOR 3RD GEAR) | 2002/08 - 2003/01 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33368G |
33368-20080 |
RING, SYNCHRONIZER (FOR 3RD GEAR) | 2003/01 - | ZZW30 FROM T/M NO.30101388 |
JPY 3,782 | USD 26.08 | ||
| 33368H |
33368-20071 |
RING, SYNCHRONIZER (FOR 4TH GEAR) | 2002/08 - 2003/01 | ZZW30 | JPY 3,993 | USD 27.54 | ||
| 33368H |
33368-12210 |
RING, SYNCHRONIZER (FOR 4TH GEAR) | 2003/01 - | ZZW30 | JPY 2,854 | USD 19.68 | ||
| 33369 |
33369-20020 |
RING, SYNCHRONIZER, NO.3 | 2002/08 - | ZZW30 NO.1 |
JPY 4,007 | USD 27.64 | ||
| 33369 |
33369-20030 |
RING, SYNCHRONIZER, NO.3 | 2002/08 - | ZZW30 NO.2 |
JPY 4,007 | USD 27.64 | ||
| 33371 |
33371-12040 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 2002/08 - 2006/01 | ZZW30 | JPY 141 | USD 0.97 | ||
| 33371 |
33371-52030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.1 | 2006/02 - | ZZW30 | JPY 70 | USD 0.49 | ||
| 33391 |
33391-12040 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 2002/08 - 2004/03 | ZZW30 | JPY 141 | USD 0.97 | ||
| 33391 |
33391-20030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 2004/03 - 2006/01 | ZZW30 | JPY 141 | USD 0.97 | ||
| 33391 |
33391-52020 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.2 | 2006/02 - | ZZW30 | JPY 70 | USD 0.49 | ||
| 33392 |
33391-12030 |
SPRING, SYNCHROMESH SHIFTING KEY, NO.3 | 2002/08 - | ZZW30 | JPY 169 | USD 1.16 | ||
| 33393 |
33393-12050 |
HUB, TRANSMISSION CLUTCH, NO.3 | 2002/08 - | ZZW30 | JPY 7,592 | USD 52.36 | ||
| 33393A |
90520-20074 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=1.75,マーク A |
JPY 56 | USD 0.39 | ||
| 33393A |
90520-20075 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=1.80,マーク B |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20076 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=1.85,マーク C |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20077 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=1.90,マーク D |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20078 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=1.95,マーク E |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20079 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=2.00,マーク F |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20080 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=2.05,マーク G |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20081 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=2.10,マーク H |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-20082 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=2.15,マーク J |
JPY 70 | USD 0.49 | ||
| 33393A |
90520-22023 |
RING, SHAFT SNAP (FOR TRANSMISSION CLUTCH HUBNO.3) | 2002/08 - | ZZW30 厚さ=2.30,ノーマーク |
JPY 56 | USD 0.39 | ||
| 33394 |
33394-12020 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 2002/08 - 2006/01 | ZZW30 | JPY 169 | USD 1.16 | ||
| 33394 |
33394-12030 |
KEY, SYNCHROMESH SHIFTING, NO.3 | 2006/02 - | ZZW30 | JPY 169 | USD 1.16 | ||
| 33395 |
33395-20030 |
SLEEVE, TRANSMISSION HUB, NO.3 | 2002/08 - | ZZW30 | JPY 7,592 | USD 52.36 | ||
| 33402 |
33402-20060 |
GEAR SUB-ASSY, REVERSE IDLER | 2002/08 - 2004/07 | ZZW30 | JPY 14,904 | USD 102.78 | ||
| 33402 |
33402-20061 |
GEAR SUB-ASSY, REVERSE IDLER | 2004/07 - | ZZW30 | JPY 10,123 | USD 69.82 | ||
| 33411W |
33429-12010 |
GEAR, COUNTER, 6TH | 2002/08 - | ZZW30 | JPY 12,654 | USD 87.27 | ||
| 33422B |
33422-10040 |
GEAR, 4TH DRIVEN | 2002/08 - 2007/06 | ZZW30 | JPY 12,654 | USD 87.27 | ||
| 33422B |
33422-52040 |
GEAR, 4TH DRIVEN | 2007/06 - | ZZW30 | JPY 8,014 | USD 55.27 | ||
| 33423A |
33423-12040 |
GEAR, 3RD DRIVEN | 2002/08 - | ZZW30 | JPY 11,248 | USD 77.57 | ||
| 33428C |
33428-12050 |
GEAR, 5TH DRIVEN | 2002/08 - 2007/06 | ZZW30 | JPY 12,654 | USD 87.27 | ||
| 33428C |
33428-12110 |
GEAR, 5TH DRIVEN | 2007/06 - | ZZW30 | JPY 8,014 | USD 55.27 | ||
| 33431C |
33431-12010 |
SPACER, OUTPUT GEAR | 2002/08 - | ZZW30 | JPY 998 | USD 6.89 | ||
| 33431D |
33431-12040 |
SPACER, OUTPUT GEAR | 2002/08 - | ZZW30 | JPY 1,097 | USD 7.56 | ||
| 33451 |
33451-12021 |
SHAFT, REVERSE IDLER GEAR | 2002/08 - | ZZW30 | JPY 1,392 | USD 9.60 | ||
| 33451H |
90109-08097 |
BOLT (FOR REVERSE IDLER GEAR SHAFT) | 2002/08 - | ZZW30 | JPY 183 | USD 1.26 | ||
| 33451J |
90430-08010 |
GASKET (FOR REVERSE IDLER GEAR SHAFT) | 2002/08 - | ZZW30 | JPY 84 | USD 0.58 | ||
| 33462 |
33462-12010 |
WASHER, REVERSE IDLER THRUST | 2002/08 - | ZZW30 | JPY 267 | USD 1.84 |